Page 1 of 9

H2D Turbo.......Getting rid of some to bring some

PostPosted: Tue Nov 17, 2009 7:31 pm
by mooze
the almighty bluetop h23a vtec h2d swap

Image
Image
Image
Image

PostPosted: Tue Nov 17, 2009 7:32 pm
by mooze
Image
Image
Image

PostPosted: Tue Nov 17, 2009 7:34 pm
by mooze
BEFORE
Image
AFTER
Image

PostPosted: Tue Nov 17, 2009 8:41 pm
by teal_dx
You're the first on here with this setup :thumb:
That was a tight fit, nice job!

can you post some close ups of the H2D adapter plate setup? What kit did you use?

PostPosted: Tue Nov 17, 2009 8:50 pm
by mooze
its a bisimoto kit. can get u pix in just a little. still have some pix of it while it was out with the tranny bolted u 2

PostPosted: Wed Nov 18, 2009 2:44 am
by Bricktops
lovely....

PostPosted: Thu Nov 19, 2009 8:50 pm
by mooze
have some more pix for you guys. it decided to take a shit on me and jump timing so the vc is off for now. so u get to c the "blue magic" cams. should be able to see the bluish tint. wil try to get better pics later.....also head stamp is p13-2 not just the p-13

Image
Image
Image
Image

PostPosted: Thu Nov 19, 2009 8:53 pm
by mooze
Image
Image
Image
Image

PostPosted: Fri Nov 20, 2009 1:57 am
by Method
is h2d using a d series tranny?

PostPosted: Fri Nov 20, 2009 2:02 am
by mooze
Method wrote:is h2d using a d series tranny?

yep

PostPosted: Fri Nov 20, 2009 3:23 am
by DontHateonEG8
how much was the h2d kit you got? i remeber the msr being somewhere around a G.

PostPosted: Fri Nov 20, 2009 4:03 am
by mooze
mine was like 800+ didnt know anyone other than bisi made one

PostPosted: Fri Nov 20, 2009 4:08 am
by itCouldgeTwoRse
is the kit just that adapter plate or the fly wheel too? And are you useing a d clutch or the h clutch?

PostPosted: Fri Nov 20, 2009 4:16 am
by mooze
plate flywheel and slave cylinder. using a stage 3 d series clutch

PostPosted: Fri Nov 20, 2009 5:37 am
by DontHateonEG8
mooze wrote:plate flywheel and slave cylinder. using a stage 3 d series clutch


all that for 800? naice!