anti roll bar on dx civic

Springs, Struts, Swaybars, Bushings, Tower Braces & more
 Reply
User avatar

anti roll bar on dx civic

By EK9/EG CRAIG
- Mon Aug 25, 2008 10:08 am #67257 wat do i need to put an anti roll bar front and rear on my civic dx? i done a b16b swap and need this done?? any suggestions lads?
User avatar

By Graham
- Mon Aug 25, 2008 12:15 pm #67265 You need front wishbones and rear lca's that have the holes for the ARB to bolt to, and depending on the size of the bar you might need some subframe reinforcement like an ASR brace or the likes
User avatar

By teal_dx
- Mon Aug 25, 2008 12:54 pm #67268 Or use the Suspension Techniques kit made for models w/o the factory sway bars :thumb:

I made how-to threads on the front & rear ST sway bars in the suspension section.
User avatar

By Got_Purp
- Tue Sep 02, 2008 1:44 pm #68032 you can get the front arms from a sol and it will bolt right up... just buy rear LCA's and that will fix that prob..
User avatar

By Greasedmonkey
- Wed Sep 03, 2008 4:27 pm #68234
Got_Purp wrote:you can get the front arms from a sol and it will bolt right up... just buy rear LCA's and that will fix that prob..


this would be the best way to go about it. that way you can use stock sway bars and such.
User avatar

By Grat
- Thu Sep 04, 2008 6:02 am #68342 after u get the lca's figured out, u should maby think about running a stock front 21 mm sway bar off a ej1. then go with a rear 22 mm itr bar. should balance out nicely...at least mine did when i first put on the rear sway bar...u will definatly need a sub frame brace with a rear sway bar of that size
 Reply
Return to EG Chassis Suspension