Civic-EG.com Forum 3.3.1

- Sat Sep 20, 2008 8:08 pm #70705 I just lowered my 92 civic hatch with the pro series skunk 2 coilovers and skunk 2 front camber kit and a no name rear camber kit i lowered it about 2 inches i have no problem with any rubbing at all. the only thing is when i turn right i get a horrible squealing noise but if i turn the wheel to the left it will totally stop. but the weird thing is that before i lifted the car up a bit to correct the wheels rubbing it was totally opposite when i would turn the wheel left it would squeal and i could get it to stop by turning to the right...any suggestions on what to look at or what to adjust all im looking for is to be pointed in the right direction thank you.

- Sat Sep 20, 2008 8:15 pm #70706 Hmm, look at the axle boots, mabey they are rubbing on something, also check if your tires are rubbing when turning, Those are the only 2 thins i can think of that can squek in the suspension area.

Mabey your tires are hitting something ? skirt ? mud flaps ?


anywase look that over, and mabey take a picture


GOOD LUCK

"If I see it, Then i can, If it changes, Then i will adapt. If i make mistakes, then i will learn."