Civic EG

Im looking into lowering my car in the spring and looking at using ebay springs , does anyone on here use them ? , are they cheap ( break easy )? Should I go with brand name ones , how much more would that cost me ?

I got some cheap ebay coilovers on my CRX field hopper... they are a little bouncy but the car has 270K with from what i can tell is the factory suspension.

I'm gunna put the rear ones on my coupe cause the back is still stock ride height and the fronts slammed on eibachs

mxracer84 wrote:Im looking into lowering my car in the spring and looking at using ebay springs , does anyone on here use them ? , are they cheap ( break easy )? Should I go with brand name ones , how much more would that cost me ?

i woulnt trust and thing on ebay.for ur suspenion/your life spend some money and do it right.you never want to cheap out on ur suspension.save up and get some nespeeds and some kyb agx shocks u can get the two for like $1000 for both.

I say go with name brand ones.
Save you from headaches.

Get name brand ones. TEIN/ SKUNK2 lowering springs. remember you are what you drive, and always, you get what you pay for. you never want to pay for something twice that will not last. =]

EG6b20R wrote:Get name brand ones. TEIN/ SKUNK2 lowering springs. remember you are what you drive, and always, you get what you pay for. you never want to pay for something twice that will not last. =]

My car does not define or make me who I am.

92smokeaccord wrote: get some nespeeds and some kyb agx shocks u can get the two for like $1000 for both.

You can get better shit for cheaper.

ive been running ebay coilover sleeves on kyb agx's for almost a year no issues. worth the $40 bucks IMO.

I rocked replica Skunk2 springs for 2 years and never had any issues. The ride was awesome and handling improved!

my cheapy ebay coilovers are now on my car... they ride okay for being on such lousy shocks. with a set of kybs they will be just fine.

i have ebay "coilovers" on my car with KYB shocks and it rides pretty good. its rough but not bouncy.

Buy some Eibach or Skunk2 coils.

All i say..

Chance wrote:

EG6b20R wrote:Get name brand ones. TEIN/ SKUNK2 lowering springs. remember you are what you drive, and always, you get what you pay for. you never want to pay for something twice that will not last. =]

My car does not define or make me who I am.

LoL. wutever. in the import world many go by that. well at least the one's i have encountered. if u took offense to it, hey that's you. sorry. but that's what i go by. No rattle can/ wobble box here. Quality s**t here. always!! :-)

I have seen photos of cheapo suspension parts ripping the frame apart. This is due to bounciness.

MG6 wrote:I have seen photos of cheapo suspension parts ripping the frame apart. This is due to bounciness.

well not everyone jumps stuff. i dont see how a "bouncy" ride can cause a chassis to "rip" apart. shouldnt believe these photos. i dont see how its possible.