Civic EG

hey guys i've noticed that the eg's carry different rear stock struts..theres the one with the fork'd end where the strut bolts on to the rear lower arm and the other as like a round hole with a bushing which go into the lower arm......i just wanna know are these struts interchangeable as i'm havin problems installin the fork'd ones where i removed the ones with the round hole

front and back r diffrent so no u cant

i thought EG's had all the same fork ones ????

maybe u have a rear integra suspension ??

lca's from integra (upper) and eg (lower)

on the usdm eg's is the bottom of the strut rounded or forked?......on the jdm models some are forked while others are rounded with the hole for the bolt.....i just wanna know are they interchangeable

to make things clearer these shocks will fit perfectly..http://www.kybshocks.com/shop/item.aspx ... .......and i wanna know would these fit..http://passwordjdm.com/Skunk2-Racing-Sp ... .....check out the pics

unless u swap out the lca, it will be like putting a square cube trough a round hole .

that makes sense...thnx mate