Civic EG

I just got some coilovers, put the fronts on, im scared to jack the rear up because i feel like it will damage the front coilovers and i only have two car jacks.. would it do much damage during the time i install the reaers??? i wanna just put them on right now and dont wannt buy more car jacks unless i have too...

Abilliondollers_vtec wrote:I just got some coilovers, put the fronts on, im scared to jack the rear up because i feel like it will damage the front coilovers and i only have two car jacks.. would it do much damage during the time i install the reaers??? i wanna just put them on right now and dont wannt buy more car jacks unless i have too...

what jack that shit up it wont do nothing but pleassssssssssssssssssssseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee use a jack stand

You mean because of the exra weight that will be on the front suspension? No need to worry about that

Cool thanks dude

dudes*

teal_dx wrote:You mean because of the exra weight that will be on the front suspension? No need to worry about that

yeah thats what i mean, also i thought my front bumper might start scraping against the floor

Abilliondollers_vtec wrote:

teal_dx wrote:You mean because of the exra weight that will be on the front suspension? No need to worry about that

yeah thats what i mean, also i thought my front bumper might start scraping against the floor

Damn how low r u

you'll be fine i did mine with 2 jack stands, first the front then the back.

depending on how low you are might have to remove the front bumper, i had to do this when i did the back on mine.

Yeah i just finished, I got one problem though ...i was connecting the reaer strut to the control arm... but the coilovers i bought didnt have the bolt that the stock strut has attached to it. i dont know if you guys know what im talking about, but anyways i substituted that bolt with an extra loose bolt im not sure if this will hold up as good as the stock design ...do u guys think that would be strong enough??? heres a picture--->[/img]

@elrompetoto

not that low, my judgement of how far the car tilts when u lif tit was wrong, im like 4.5 inches off the floor

Abilliondollers_vtec wrote:Yeah i just finished, I got one problem though ...i was connecting the reaer strut to the control arm... but the coilovers i bought didnt have the bolt that the stock strut has attached to it. i dont know if you guys know what im talking about, but anyways i substituted that bolt with an extra loose bolt im not sure if this will hold up as good as the stock design ...do u guys think that would be strong enough??? heres a picture--->[/img]

cut the nut off of ur stock rear shocks and use that with the stock screw

Abilliondollers_vtec wrote:@elrompetoto

not that low, my judgement of how far the car tilts when u lif tit was wrong, im like 4.5 inches off the floor

o ok cuz im slamd but i can still lift it fine