Civic EG

i Know its blurry but thats the front LCA where it connects to the spindle , my problem is i cant get the lca off from there i got it off from the subframe but now it wont drop from there if it jiggle it the bolt juts moves with it ,is there anything i can do to get it off

you need a ball joint separating tool.


or you can do it with a big flathead but your likely to rear the boot

TrailerTrash wrote:you need a ball joint separating tool.

Yes, this. You can rent one from Autozone.

Try this too if you haven't. Hope you get it off.

http://www.youtube.com/watch?v=ISY8bGof3bQ&feature=fvst

Punksz6 wrote:Try this too if you haven't. Hope you get it off.

http://www.youtube.com/watch?v=ISY8bGof3bQ&feature=fvst

neato

I know huh...I did this when I had to change my ball joints..

hit it with a hammer. perferably a big one. dont hit the ball joint or the thread. hit what it gose through