Page 1 of 1

right height question

PostPosted: Mon May 28, 2012 8:40 pm
by 95cpeEX
so i know this site if eg cars, but i have a dc4 which is basically the same exact thing and i have regaurding my uneven lowered ride height

i just recently got a 98 integra thats lowered on skunk2 springs and struts.
my springs on NON adjustable and my car sits like a hot rod (lower in the front then in the back.

is there by some chance that kid who put it all together before i got the coils mixed up and put the fronts on the back and the backs on the front? im not sure how the set was purchased because i was checking them out on passwordjdm and all the complete sets i was seeing were adjustable so im assuming he purchased drop springs and struts seperatly. is there some way to fix this?

PostPosted: Mon May 28, 2012 10:48 pm
by EJ1_MK
yes there should be part numbers on the springs that you can look up on skunks site or post them here the last 3 digits should be the spring rate. write them down and post them and the I will be able to tell you whether or not they were put on backwards or not but it does sound that is what he might have done.

PostPosted: Tue May 29, 2012 12:16 am
by 95cpeEX
i will do that when i get a chance. dont have the time right now to go out and jack up my car and check out the numbers