Page 1 of 1
swap type r rlca
Posted:
Tue Dec 09, 2008 5:39 pmby Josiah
i have the type r rear lower control arms on, they are fatter and they take a dif shock in the back. they fit. my question is does anyone know if they will fit an ek? 96-00? i bought an ek and the suspension is jacked up and bent i know i know ek, i need to know though
Posted:
Tue Dec 09, 2008 6:08 pmby zeppelin101
Well, because the scrap yard sent me the wrong arms and I wasn't aware they were EK arms, I currently have some of those on my car so I would imagine that the rear LCAs are interchangeable as they went in perfectly...
Posted:
Tue Dec 09, 2008 6:28 pmby Graham
zeppelin101 wrote:Well, because the scrap yard sent me the wrong arms and I wasn't aware they were EK arms, I currently have some of those on my car so I would imagine that the rear LCAs are interchangeable as they went in perfectly...
You have ek arms on your eg?!?!
ek ones are WAY longer than eg and dc2 arms!!!!!!!
To the OP, they will fit but are too short = mega positive camber, seriousely, dont do it
Posted:
Tue Dec 09, 2008 7:26 pmby zeppelin101
Well I can only assume they are EK arms, they certainly don't match the ones I've pulled off an EG6 this weekend just gone.
Posted:
Wed Dec 10, 2008 12:57 amby Graham
Fire up a pic, if you put ek arms on an eg youd have loads of negative camber and yours doesnt seem to have that
Posted:
Wed Dec 10, 2008 1:35 amby asianrob
if they look like they are stamped steel they are the EK stlye the EG/DC/DA style are the ones look like the are made in a mold
Posted:
Wed Dec 10, 2008 10:01 pmby Josiah
fugn reckd the ek, nevermind AAGHGH!!! Any1 wana buy a d16 vtec motor. jus kidn.