Page 1 of 1
is dc2 suspension compatible with eg6 civic?
Posted:
Mon Jan 05, 2009 4:47 pmby hanzo666
as stated above just wanted to know will dc2 suspension fit eg6???
Posted:
Mon Jan 05, 2009 5:02 pmby EG-IOW
i think it does fella, think you need the dc2 lower control arm aswel?
wait for another more definate reply before buying anything tho
Posted:
Mon Jan 05, 2009 5:44 pmby Greasedmonkey
As long as you have the correct lower control arms you are good.
Posted:
Tue Jan 06, 2009 4:06 amby vtec_gloucester
as said above... everything is interchangable, only thing is you need to use JDM lower control arms.
itr set up will lower an eg civic aprox 10mm and the shocks are obviously much stiffer.
great up grade for an eg civic for some one on a budget or doesnt want a harsh bumper ride that coilovers give.
Posted:
Tue Jan 06, 2009 5:35 pmby Graham
Standard ITR stuff doesnt lower your car - it raised mine!
Posted:
Tue Jan 06, 2009 6:23 pmby vtec_gloucester
Graham wrote:Standard ITR stuff doesnt lower your car - it raised mine!
oh, well i never used ITR stuff on any of my EG's but i have always been told and read that it would lower an EG by about 10mm.
i'll take your word that it doesnt though
seeing as you have actually done the swap
Posted:
Wed Jan 07, 2009 12:37 amby Graham
Posted:
Wed Jan 07, 2009 3:37 amby Greasedmonkey
why not graham?
Posted:
Wed Jan 07, 2009 2:23 pmby Mordiiax
The itr lca is longer and will produce more negative camber, which is positive
Posted:
Wed Jan 07, 2009 5:13 pmby Graham
Emm what? An ITR lca is the exact same length as an eg one...
My car looked rediculous, i couldnt believe how high it was... if i find it ill post it up though
Posted:
Wed Jan 07, 2009 5:34 pmby Mordiiax
That´s what i've been told anyway
Posted:
Thu Jan 08, 2009 2:33 amby Graham
They're definetaly the same length man, i put them on mine and had the allignment done and it was the same rear camber as when i had eg arms!!