Civic EG

When putting an ITR rack into an eg, do you use the power steering hoses from the ITR or do you use your standard eg ones?

I know you can use the standard eg hose on the passenger side of the rack and that it connects straight up, but the hose that goes from the drivers side bit on the rack to the top of the PAS pump im not sure about...

One of the lines on my eg rack is seized solid so theres no way ill get it off without messing up the nut, will need to get another one but unsure if i need an eg one or one from an Integra...

Anyone shed some light on this?

Well, your drivers side and passenger side is all screwy compared to the states, but Im under the assumption that you can use the line from the ITR rack.

do you have a b Series in your car?

if so then yea the Integra ones is the one you will need. they are longer than the D series ones.

Greasedmonkey wrote:Well, your drivers side and passenger side is all screwy compared to the states

True, but you guys would have the exact same issue just your drivers and passenger side are the other way round

I've got a d series thats why i wasn't sure if the PAS line would match up to my pump...

Went up to my friends and took the PAS hose from the same car my rack was from and it looks like its going to work, didnt think it would connect to my pump but it does