D16z6 Brakes

Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
 Reply
User avatar

D16z6 Brakes

By Kane
- Sat Jul 18, 2009 10:37 pm #131481 so i was wondering..

whats the BIGGEST OEM brake swap i can do on my eg4 with a d16z6

Teg brakes maybe?

:)

cheers
User avatar

By Greasedmonkey
- Sat Jul 18, 2009 11:13 pm #131487 Biggest? NSX or twin pot legend caliper on 11 inch rotors would be the biggest. with out having to get bigger wheels.
User avatar

By Graham
- Sun Jul 19, 2009 8:08 am #131539 You can get 300mm twinpot accord type r brakes on too, but make sure you have an esi with 262mm fronts, as otherwise you have the wrong hubs and would need to change them aswell as your calipers
User avatar

By Kane
- Sun Jul 19, 2009 10:58 am #131544 :shock:

awesome

some really good ideas here guys :)

ummm whats the stud fitment...?

4x114

or 4x100

im running 4x100's atm.. with DRUMS :woot: :woot:

LAL
User avatar

By Graham
- Sun Jul 19, 2009 2:38 pm #131553 You can keep 4x100, the calipers you choose dont affect the stud pattern. 4x100 282mm discs are easy to get hold of, you use MG ZS ones :P 4x100 300mm discs would need to be ep3 or accord type r ones redrilled though, but still easy to do
User avatar

By Kane
- Sun Jul 19, 2009 2:50 pm #131554 so i just get bigger disks and the hubs stay the same?

sweet :thumb:

well... what about for the back... what disk converstions are there

im running drums

eg4...

oh and BIG question...

how the hell do you get the little grub screws off from the front disks... mine are so badly battered theres like... no head on it at all :x

sucks


thanks in advance guys and girls :mrgreen:
User avatar

By egsedanguy
- Mon Jul 20, 2009 4:06 pm #131686 it helps to get them screws out witha screw driver and taping the screw with it to help losen it up. also ther is a tourq screw driver that when you hit with hammer it will twist. if there already stipped out, then just drill em out. you dont need them in, but it dont hurt to get new ones and slap em on...
User avatar

By Greasedmonkey
- Mon Jul 20, 2009 4:31 pm #131694 Rear brakes you can get off any 94-01 teg or 99-00 SI.

You can even upgrade those brakes from 9.5 to 10.4ish. from the 02-03 si.
User avatar

By Kane
- Mon Jul 20, 2009 9:13 pm #131790 drill them huh?

hmm was thinking get the blwo torch on the case :twisted:

lol....

yeah i thought the teggys were like.. 114?

i want to stay 100 if i can :P
User avatar

By Kane
- Mon Jul 20, 2009 9:14 pm #131791 *Blow torch :roll:
User avatar

By Greasedmonkey
- Tue Jul 21, 2009 12:55 am #131923 tegs are 4x100
User avatar

By Kane
- Tue Jul 21, 2009 2:00 pm #132019 since when?

what year is that?

ive had a set of rear brakes from a teg and it was 4x114
User avatar

By DavidCivicSi
- Tue Jul 21, 2009 5:56 pm #132144 can i put prelude 97-01 discs and caliper on stock 262mm hub ?
User avatar

By egsedanguy
- Tue Jul 21, 2009 6:18 pm #132158
Kane wrote:since when?

what year is that?

ive had a set of rear brakes from a teg and it was 4x114


teg is 4x100. he might have alread upgraded to a larger disk and lug pattern. but stock is 4x100 just like civic. ls meshes on civics, gsr blades on civic.... :thumb:
User avatar

By SOHCivegra
- Tue Jul 21, 2009 8:19 pm #132195
Kane wrote:since when?

what year is that?

ive had a set of rear brakes from a teg and it was 4x114


My rears are out of of my 90-93 Teg. Full Swap broham. Specifically out of my 93 GS 4 x hundo
 Reply
Return to EG Chassis Brakes