need help dc2 brakes

Calipers, Rotors, Pads, Lines & more- OEM and Aftermarket
 Reply
User avatar

need help dc2 brakes

By Gram0401
- Thu May 07, 2015 5:45 pm #353604 I have a 94 dx hatch im swapping over to integra front brakes. I replaced the ball joints and bearing, I also purchased new axles (d16z6 axles) for the civic. the problem that I am having it seems like the driver side is a little short. do the d-series come with different size axles?


tight as axle nut will go on with air
Image


trans side... sticking out far enough for the car not to move in gear
Image

thanks for looking

By HeikDiesel
- Thu May 07, 2015 7:16 pm #353606 You're going to want to get B series axles. 94-01 Integra/B Series Del Sol/99-00 Civic SI axles work
User avatar

By Gram0401
- Thu May 07, 2015 7:26 pm #353607
HeikDiesel wrote:You're going to want to get B series axles. 94-01 Integra/B Series Del Sol/99-00 Civic SI axles work


thanks for the quick reply
but that's not going to work at all because b-series has a intermediate shift
the d-series has nowhere to bolt that to the block


does any one know if the axle for 88-91 is the same?
User avatar

By Gram0401
- Fri May 08, 2015 2:49 pm #353624
iLLson wrote:d15/d16 axles are the same.

but your axle isnt pushed in all the way to the trans.

wiggle wiggle push!


I know that the axle isn't all the way in the trans, when I tighten the axle nut it pulled it out the trans the axle seems to be about 1/2-1" short,
I need to know if the ef d-series axles are shorter.... im think they may have gave me the wrong axle.....

By HeikDiesel
- Fri May 08, 2015 6:22 pm #353625
Gram0401 wrote:
HeikDiesel wrote:You're going to want to get B series axles. 94-01 Integra/B Series Del Sol/99-00 Civic SI axles work


thanks for the quick reply
but that's not going to work at all because b-series has a intermediate shift
the d-series has nowhere to bolt that to the block


does any one know if the axle for 88-91 is the same?


I don't understand your question. You have a d series in the car and put integra spindles on the car? Your d series axles should be the same spline/size as the integra hubs
User avatar

By Gram0401
- Fri May 08, 2015 6:46 pm #353626
HeikDiesel wrote:
Gram0401 wrote:
HeikDiesel wrote:You're going to want to get B series axles. 94-01 Integra/B Series Del Sol/99-00 Civic SI axles work


thanks for the quick reply
but that's not going to work at all because b-series has a intermediate shift
the d-series has nowhere to bolt that to the block


does any one know if the axle for 88-91 is the same?


I don't understand your question. You have a d series in the car and put integra spindles on the car? Your d series axles should be the same spline/size as the integra hubs


the car has a d16 motor, the spindles bolted to the car fine.
the axles fits in the trans and hub. but the length of the axle its self seems to be about an inch short because when I tighten the axle nut it pulls the axle out of the trans
these are not the same axles I had with the stock breaks (purchased new axles) the passenger side went together fine. I want to know if there is a difference in length between 88-91 axles and 92up axles (d-series) because im starting to think that they sold me the wrong axle.
I don't have the old axles because I had to use them for a core charge.

By HeikDiesel
- Mon May 11, 2015 12:58 pm #353671 Pretty sure cable trans axles will not work with hydro trans axles. So if that's the case you have the wrong stuff
 Reply
Return to EG Chassis Brakes