Civic EG

I'm trying to do an EX front disc upgrade, but I was wondering if the spindles are the same for 2dr and 4dr.

Here's pics I took from the junk yard off of a 4dr EX.















[/img]

There are 2 types of front knuckles for the 92-95 Civics.

Non ABS type knuckle applications:
2 Door: 93,94,94 (DX models)
3 Door: 92,93,94,95 (CX,DX,Si,VX models)
4 Door: 92,93,94,95 (DX,LX models)
Del Sol: 93,94,95,96,97 (S,Si models)

ABS type knuckle applications
2 Door: 93,94,95 (EX, EX-S, and EX(ABS)) EX and EX-S have rear drums
3 Door: 94 (Si (ABS)) rear disk
4 Door: 92,93,94,95 (EX(ABS), LX(ABS)) rear disk
Del Sol: 94,95,96,97 (V-TEC) B16 model
Integra 3 Door: 94,95,96,97,98,99,'00,'01 (LS,LS(Special),RS,GS(leather), GS-R, GS-R(leather),Type-R)
Integra 4 Door: 94,95,96,97,98,99,'00,'01 (LS,LS(Special),RS,GS,GS(Leather),GS-R,GS-R(Leather))

Random info:
94 and 95 Civics 2 Door EX (ABS), 3 Door Si (ABS)(94 only),4 Door EX(ABS) and LX(ABS) have the same Rotors and Calipers as ALL 94-01 Integras (EXCEPT THE Type-R)

You need to take the spindles and calipers. Take the upper ball joint off, take the lower ball joint off, remove tie rod ball joint, disconnect brake line, and remove axle. take the whole arm, caliper and spindle assy off. I did this on my car with a 94 ex sedan fronts and 95 teggy rear disk.
good luck

Well it sounds like i can use a set of 4dr front spindles on a 2dr car
Im assuming you did this on your hatch egaedanguy?

sentientprogram I have 4 door EX front and rear disc brakes on my hatchback. Like egsedanguy said you will need everything from the donor car. For the fronts you will need the whole knuckle, rotor, and caliper.

All the stuff that is fresh painted black is what you need.

Econobox, egsedanguy thank you for the verification.

sentientprogram wrote:Econobox, egsedanguy thank you for the verification.

no problem man Good luck with the swap. I love my ex brakes. they fit the car better. and fill the area behind the wheels nicer.