Civic-EG.com Forum 3.3.1

- Sun Apr 19, 2009 6:01 pm #111662 so i want to take off my moldings so if anyone could help me out with where to start or point me to a good DIY thread that would be awesome thanks

92 DX EG8 *work in progress

- Sun Apr 19, 2009 6:32 pm #111668 They need to be taken off from the inside, i am pretty sure. Just take off the door panels and pop them out with a flat-head. There are probably other ways though.

- Sun Apr 19, 2009 7:48 pm #111673 thanks man just thought i would ask before i took stuff apart

92 DX EG8 *work in progress

- Sun Apr 19, 2009 8:31 pm #111683 take your time the clips break easy

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Sun Apr 19, 2009 9:29 pm #111691 use some needle nose pliers and there's a screw that's right where the door latch is when you first open the door that needs to be removed as well

- Sun Apr 19, 2009 10:06 pm #111697 ya i took them off and managed to not break any clips but the area where the screw was was rusted so it broke when i tried to undo it but oh well it still sits flush i think im gonna need to invest in some thin side moldings mine are pretty beat up thanks for the help guys much appreciated

92 DX EG8 *work in progress

- Sun Apr 19, 2009 10:58 pm #111705 it doesn't matter really. the screw on my passenger door was rusted too and broke and one of the clips next to it and it still sat flushed lol