Civic-EG.com Forum 3.3.1

- Tue Jul 22, 2008 8:14 am #62925 besides the power mirrors and the switch, what else do i need to have power mirrors?

http://cgi.ebay.com/ebaymotors/_Car-Tru ... .m14.l1318

i was thinkin about these

i HEART my honda

- Tue Jul 22, 2008 2:03 pm #62948 I had manual mirrors but got new doors with electric mirrors on them, they just plugged in and that was that

Theres extra wiring in the doors that manual cars dont have so you need the wiring the connects the mirrors to the interior loom, and the switch obviousely

If you want power folding mirrors you have to add a relay and more interior wiring though

My 1st eg build up -> http://civic-eg.com/viewtopic.php?t=802

- Tue Jul 22, 2008 5:55 pm #62972 so all i would need is wire to run through the door? any wire will do? is there any plugs for the mirrors or the switch that i need

not power folding btw

thanks guys

i HEART my honda

- Tue Jul 22, 2008 7:14 pm #62976 go to the junker and get the door harness from an EX and then get all the plugs for it there might be other things you might need too

92 civic cx sold!!
horizon gray 94 LX-A wrecked :/
white 92 civic Si (traded)
primered 94 teg sold
92 civic DX sold!!
93 red EX coupe parted out!
93 LS400 Midnight indigo sold!
92 civic LX sold!!
90 240sx sold!
93 faded black EX coupe

- Wed Jul 23, 2008 12:23 am #63019 Its 2 wires i think, but its easier just to get complete looms than make your own, unless you really know what you're doing!

Id do what Rob said, get the looms + switch out one from a scrapyard

My 1st eg build up -> http://civic-eg.com/viewtopic.php?t=802