Spoon replica lip

Appearance, Paint & Body Work
 Reply
User avatar

By asianrob
- Fri Aug 08, 2008 1:13 pm #65172 jdmshit.com
User avatar

By dallas_eg6
- Thu Aug 21, 2008 7:36 am #66924 Have you tried PASSWORDJDM.COM
User avatar

By Greasedmonkey
- Thu Aug 21, 2008 11:40 pm #67006 JDMshit.com has a urethane one. best bet right there for not breaking.
User avatar

By whitedxi
- Tue Sep 16, 2008 6:12 pm #70049
Greasedmonkey wrote:JDMshit.com has a urethane one. best bet right there for not breaking.


not braking...
but I managed to get one towed on the freeway for 60 km before I noticed it hanging under the car....
damage -> one side was gone
User avatar

By asianrob
- Tue Sep 16, 2008 8:35 pm #70072
whitedxi wrote:
Greasedmonkey wrote:JDMshit.com has a urethane one. best bet right there for not breaking.


not braking...
but I managed to get one towed on the freeway for 60 km before I noticed it hanging under the car....
damage -> one side was gone


was that the JDMshit.com lip or an ABS plastic lip?
User avatar

By whitedxi
- Wed Sep 17, 2008 4:43 am #70148
DC4rob wrote:
whitedxi wrote:
Greasedmonkey wrote:JDMshit.com has a urethane one. best bet right there for not breaking.


not braking...
but I managed to get one towed on the freeway for 60 km before I noticed it hanging under the car....
damage -> one side was gone


was that the JDMshit.com lip or an ABS plastic lip?


JDMshit.com - :roll:
User avatar

By Greasedmonkey
- Wed Sep 17, 2008 10:50 pm #70227 Concrete will grind it away. its like taking coarse sand paper to it. You cant expect it to hand that.
User avatar

By asianrob
- Thu Sep 18, 2008 1:16 am #70251 they got new POLYurethane ones now...
User avatar

By whitedxi
- Thu Sep 18, 2008 8:03 am #70287
DC4rob wrote:they got new POLYurethane ones now...


mine was PU aswell. So they don't break but can be sanded clean off :P
So make sure it holds!!
 Reply
Return to Exterior & Body