Civic-EG.com Forum 3.3.1

- Sat Jan 23, 2010 11:15 pm #170605 So this is is so stupid and way upsetting
Just bought a seibon oem style Carbon fiber hood and I put on a brand new oem hood bra on it. Just because i thought it looked sweet. I rained for like two days and the car sat outside and wasnt driven for those couple days just because. So i took the bra off to dry it out and didnt see anything at the time. two days later i see the stupid foggy spot where the bra was. not a everywhere that it coverd only one part .. I dont get how at all. or how to fix it . What a waste of money. FML

Last edited by curtismcghee12 on Sat Jan 23, 2010 11:53 pm, edited 1 time in total.

- Sat Jan 23, 2010 11:27 pm #170607 imo it sounds like its gel coated so u need to get it clearcoated... my cf hood is clear coated and its fine...

- Sat Jan 23, 2010 11:41 pm #170611 what brand?

- Sat Jan 23, 2010 11:43 pm #170612 seibon

- Sat Jan 23, 2010 11:53 pm #170616 you ever get oxydization b4 the clear coat?

[teal_dx]

- Sun Jan 24, 2010 2:05 am #170638 I wonder if it was so new that it hadn't cured yet and all that moisture under the bra messed up the finish?
Paint can take a few months to fully cure.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Sun Jan 24, 2010 2:49 am #170648 thats what it sounds like... did u get warrenty on it???

- Sun Jan 24, 2010 3:52 am #170663 bought it used on craigslist unfortuantly
was in great condition too

[teal_dx]

- Sun Jan 24, 2010 3:38 pm #170732 has leaving it out in the sun helped any more at all?

(not that you guys have had much sun lately)

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Sun Jan 24, 2010 5:15 pm #170745

has leaving it out in the sun helped any more at all?

(not that you guys have had much sun lately)

havent had a chance like you implied haha

i hope thats all it needs

- Sun Jan 24, 2010 6:41 pm #170763 if you have balls, you could take a hair dryer and lightly brush it back and forth and dry up what looks to be moisture under the clear. It happened to the Lexi (lexus cars) i used to do it at the dealership all the time.


lol. now that i went back and re-read the post,it is most likely moisture in the clear coat. it would happen to the lexus because they had this protective film that water would get under and make this happen. hair dry away.

Last edited by Dippin_EG on Sun Jan 24, 2010 6:44 pm, edited 1 time in total.

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!

- Sun Jan 24, 2010 6:43 pm #170764 alright i need to gather material
first the balls ..um and
o ya a hairdryer as well

- Sun Jan 24, 2010 6:44 pm #170765

alright i need to gather material
first the balls ..um and
o ya a hairdryer as well

heat from bottom or top ?

- Sun Jan 24, 2010 6:52 pm #170769 id go from top to bottom about 5-6 inches away if it gets really hot, then just brush kinda like painting only really careful not to burn it. cause if you burn it, its def gonna look like crap. granted it takes alot of heat to burn, im just trying to have you not fuck it up.

it may take a min, but it should work.

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!

- Sun Jan 24, 2010 6:53 pm #170770 and you can use touch (your hand) to see if it gets too hot. just make sure it doesnt burn

::: 1992 Civic Si ::: 1992 Integra GS-R :::
GREDDY EVO 2 FTMFW #2 ..... >100,000 mile club!