Page 1 of 1
I need to remove bondo help

Posted:
Wed Dec 07, 2011 7:35 am
by civic eg-k
Does any one know how. Remove bondo from the side moldings?
When I bought the car they shaved the side molds and put a 96 front end on my Hatchback b4 i got it. I was really despreat to have a Hatchback so i jumped at the opertunity and took it. Il be puting the stock front end tomorrow. [/list]

Posted:
Wed Dec 07, 2011 3:13 pm
by teal_dx
get a stiff wire wheel, high speed drill and a dust mask


Posted:
Thu Dec 08, 2011 10:16 pm
by civic eg-k
somtimes u gotta think outside the box thnx should go down to bare metal?

Posted:
Fri Dec 09, 2011 2:50 am
by teal_dx
yeah you might as well if you're going to repaint the car. if they filled the gap with bondo, you never know what kind of lazy prep work they did.

Posted:
Sun Dec 11, 2011 6:22 pm
by civic eg-k
I got the new front end on aready but headlights sit a bit low. Any1 have a problem after replacing there radiator support?

Posted:
Mon Jul 09, 2012 9:15 am
by cruzan
Did u bolt up or weld the radiator support up

Posted:
Mon Jul 09, 2012 9:45 am
by baconsauce
teal_dx wrote:yeah you might as well if you're going to repaint the car. if they filled the gap with bondo, you never know what kind of lazy prep work they did.
