Anyone run HPDE?

I'm wondering what everyone runs as we all more or less have the same cars. Never really got a chance to ask this on other boards with a broader scope, like Honda tech. I'm lookin for suspension set-ups.
Me personally, I use the stock wheels, with wider tires (195x60), the tires are Yokohama YK420's, and I had them siped. One upper strut tower bar in the front, and Ground Controls mated to some KYB AGX's. I ran the tires at 40psi cold, while the AGX's I had at 4 (firmest) in the front and 2 in the rear. I lowered the car around 1 1/2".
The set-up I had was pretty predictable, and handled pretty well through the technical parts. No problems understeering, and I was able to rotate the car pretty well under throttle.
Thanks!
Me personally, I use the stock wheels, with wider tires (195x60), the tires are Yokohama YK420's, and I had them siped. One upper strut tower bar in the front, and Ground Controls mated to some KYB AGX's. I ran the tires at 40psi cold, while the AGX's I had at 4 (firmest) in the front and 2 in the rear. I lowered the car around 1 1/2".
The set-up I had was pretty predictable, and handled pretty well through the technical parts. No problems understeering, and I was able to rotate the car pretty well under throttle.
Thanks!