oil relocation kit
Posted: Thu Jun 18, 2009 6:41 pmim looking for one for my h22 and im looking for a specific one i saw once in a car magazine, all the ones i can find uses a hose to relocate it, im looking for one that is metal
Page 1 of 1
Posted: Thu Jun 18, 2009 6:41 pmPosted: Thu Jun 18, 2009 6:53 pmI've never seen one that is all metal. I'm pretty sure they will always use a hose from the stock location to the new location and a hose going back. The metal is the mount and the part that the filter screws on to.
Posted: Fri Jun 19, 2009 4:24 ami dont know i must of been on crack when i looked at it.. lol
but it was just a polished metal pipe leading around the engine and over the tranny and the oil filter on the end
but it was just a polished metal pipe leading around the engine and over the tranny and the oil filter on the end
Posted: Fri Jun 19, 2009 4:15 pmcan you find and post the picture?
Posted: Fri Jun 19, 2009 5:21 pmnot saying you're an idiot, but could they have been stainless braided lines?
Also cars in magazines usually have a lot of $$$$ into them, it's possible that the lines were custom made & polished.
I imagine it would be like using a brake line tubing bender but larger.
Then flare the ends of the pipe with -AN fittings and you're done
Also cars in magazines usually have a lot of $$$$ into them, it's possible that the lines were custom made & polished.
I imagine it would be like using a brake line tubing bender but larger.
Then flare the ends of the pipe with -AN fittings and you're done