Page 1 of 1
Rear window dampers for a eg
Posted:
Tue May 18, 2010 7:49 amby Honda4life
So I was wondering if anyone knew how to take the rear window dampers off and install new ones from a 92 Honda civic hatch and how hard is it to do and where I can buy new dampers? Also I went to the dealer just to see how much they are and of course there gonna be hella expensive at Honda $103 for each, crazy
Posted:
Tue May 18, 2010 12:59 pmby teal_dx
moving this to Chassis- Hatchback since it doesn't really relate to California
They come off by loosening the bolts.
Yeah don't do to the local dealership, they'll rape you.
check
www.hondaautomotiveparts.com
http://www.hondaautomotiveparts.com/aut ... 5=TAILGATE
$68 each. Junk Yard will be your best deal
Posted:
Wed May 19, 2010 1:08 amby MG6
Got them replaced and yup, OEM is the way to go. Very easy, bolts like Teal said and the new unit will require you to snap the adapter together.
Very easy. Note, the struts are special order, so it might take couple of days but it will come and you will be so happy to install the new unit.
Posted:
Wed May 19, 2010 1:43 amby Classiccarsrule85
every junkyard one i found was crap in the end lasted a month or more two....so i ended up buying a set off ebay new and bolted right in for i think it was 50$$ and they are very freaking strong too.....
Posted:
Wed May 19, 2010 4:54 amby 92redrocketHATCH
would some from an integra hatch work? cause at my junkyard thats what we have closest to hatch, theres one civic hatch and itts stripped
Posted:
Wed May 19, 2010 4:54 pmby chilango41
I dont thin integras will work
Posted:
Wed May 19, 2010 7:20 pmby Classiccarsrule85
integra =way too long you need ones built just for a civic hatch since there are many different sizes etc.....
Posted:
Thu May 20, 2010 8:06 amby FREDDY1
Get $ of them and use the extra 2 for hood dampers =]