Civic EG

Hello

I just received my new TYC projector headlights.
There is a transfer harness from H7 to H1, but there is no such for the side markers. The plug I have now is square shaped, and the one I need for the TYCs is elliptical.

I figured, that it is different, because in the USA the city lights are actually the blinkers aswell, but in Europe the city lights are a separate, white bulb. So, could anyone tell me what is the shape /photo would work/ of the plug that fits into your side markers?

Also, if anyone has installed TYCs for EG, could you advice on that? Do you ran into any problems, etc?

Here is the plug I am talking about.. see how it is elliptical and the harness I have is square...






Thanks!

i picked up a set for mine.Fit right in.Your stock side markers come apart btw...The plug in itsself does.

I can't seem to understand you. The plug comes apart? And when I disassamble it - then what?

Well... a friend of mine told me, that I should cut the wires and use cable shoes and do it myself.

I wanted to make it as clean as possible, but obviously I'll have to cut and solder.

Now... the question is - how do I make the low beam to light up with the high beam. Now, because the headlights used to be H4 type, when I turn on the high beam the low beam turns off. I want the low to stay lid while the high is on.

Any ideas?