Page 1 of 1

civic hatch 94

PostPosted: Wed Jan 04, 2012 5:39 pm
by kc12305
im in the process of getting a 16 valve D series motor and it has almost 100k on it and im just wondering what kind of things can i do to this motor im asking for personal opinions here cause i want to boost it and what are somethings i should do if i want to boost it ive seen some bossted ones on here just whats the differance betweeen the v tec and a 16 valve ?
if anyone has any info for advice for me post it here cause i dont want to have to start over with this motor , i currently have a d16z6 v-tec with low miles and this hatch is is really good shape so im just wondering what will be said
Image
this is the motor

PostPosted: Wed Jan 04, 2012 6:42 pm
by Greasedmonkey
You can do quite a bit to it. Its just depends on what you want from it. The options are plentiful.

PostPosted: Wed Jan 04, 2012 6:43 pm
by kc12305
well i want to run a normal 8 psi turbo kit on it and have the motor last me a long time

PostPosted: Wed Jan 04, 2012 7:10 pm
by Apexracing
So you have a d16z6 and your picking up that d15b7. Why?

PostPosted: Wed Jan 04, 2012 7:18 pm
by kc12305
well this guy wants to trade me for a hatch and it has that motor so whats the diff from d16z6 from this series

PostPosted: Wed Jan 04, 2012 7:34 pm
by Apexracing
Z6 has vtec, higher compression, higher redline. Shorter ratio transmission and better internals.

PostPosted: Wed Jan 04, 2012 7:36 pm
by kc12305
oh damn well i never knew that ... like i said im using this forum to learn more about my motor and stuff like that but is it all possible to really turbo charge a d15b7 motor on stock . parts

PostPosted: Wed Jan 04, 2012 7:43 pm
by Apexracing
It is but the z6 would have better gains.

PostPosted: Wed Jan 04, 2012 7:52 pm
by teal_dx
check out the D series section of the forum. There's a sticky thread toward the top with the specifications of D series engines. Usually the answer is easy to find if you take a minute to search for it. :thumb:

PostPosted: Wed Jan 04, 2012 8:04 pm
by kc12305
sweet just truth is .. im really trying to just build a basic boost on this motor.. i want to

PostPosted: Wed Jan 04, 2012 9:06 pm
by FG2_Andrew
kc12305 wrote:sweet just truth is .. im really trying to just build a basic boost on this motor.. i want to


ok, great. you've said that like 6 times.. here's the run-down.

d16z6 > d15b7
vtec > non-vtec
boost @ 9 lbs on a b7 won't do much for you
boost @ 9 lbs on a z6 won't do much for you, but more than the b7
slapping an ebay turbo kit on your motor won't last

------------------

keep your z6. you'll thank yourself later!
:thumb:



[edit]
punctuation rules, you should try it. it'll help clear up alot of the confusion on what you're trying to ask. and pictures help too.

PostPosted: Thu Jan 05, 2012 2:18 pm
by kc12305
ok thanks this was a good thing to have seen lol but im going to trade for the hatch and just do a v-tec swap in it