Civic EG

My hatch was broken into and they popped of the passenger door handle, bent the clip the you use to bolt the handle on and took the handle too. I am wanting to know if i can use a four door rear handle so i wont have a hole where the key lock goes. If anybody has pics of one or how to do it lmk. thanks

You can use 4Door rear handles. You can also use Jimmy Jammers, That site has tons of really good articles on making your civic much more theft resistant. Because of following stuff on there My car is still mine.

I've heard some people get locks from different cars (non-honda) and used those locks and keys so thieves can't use a jiggler..something like that lol

nig90 wrote: I am wanting to know if i can use a four door rear handle so i wont have a hole where the key lock goes.

I've seen it done a few times & it looks clean. I don't know if any modification is required though...

4 door rear handles arent a straight fit - they're the exact same shape so fit in that respect, but the tabs that attach it to the door on the inside are slightly different. The one to the front of the handle bolts up, but the one at the back is in a different place on the rear of a 4 door compared to the hatch. In theory you could cut the tab off and remount it to fit the handles, but i didnt want to go to that trouble so just disconnected my door locks and got a good alarm, problem solved

Car security will be a good option..

make a special brakect or an "L" shaped flange for it.. i was wanting to do this long time ago but didnt feel like doing it.

Yeah it's a real pain. Best thing to do is get some bondo and cover the keyhole on your original handles. Then paint the handle.

If you do this, leave your hatch keyhole alone. You want to be able to get into your car somehow when the battery goes dead.

yea you would need to mod something my friend tried it didn't work

just leave the hatch one and fill the others worst case you can climb through the back

Well, since someone dug up this grave, I will say also that it's quite easy to remove the lock bar from the back of the handle.

Don't listen to these guys we do it all the time around here its very clean and is super simple if you think that takeing your door handles out is hard then you probably could'nt change a tire either all you need is a 10mm, a phillips screwdriver,and a brain you can do it!lol good luck

lol this has been done along time ago. thanks and you can stop posting now.

pureautosports wrote:Don't listen to these guys we do it all the time around here its very clean and is super simple if you think that takeing your door handles out is hard then you probably could'nt change a tire either all you need is a 10mm, a phillips screwdriver,and a brain you can do it!lol good luck

and obviously you didnt read the OP. get off the internet.

ok dick! thought this was a forum my bad retarded question anyway