Civic-EG.com Forum 3.3.1

- Tue Feb 24, 2009 2:20 pm #98605

wheels will be sandblasted and powder coated black.




i then wet and dried the bonnet and tailgate so i could debadge them.
whilst i was at it i also wet and dried the front wings and the front and rear bumper as they were faded.




i then plastic welded a crack i had in my rear bumper and fiberglassed it along with the holes where the badges were.






i then had my bonnet spraid black was going to get my tailgate done aswell but changed my mind last minute! after it was sprayed i wet and dried and used fine compound and then waxed it to get it nice n shiny!



car all taped up





got my car sprayed by my grandad



and here it is finished!

Still to come:

skunk2 fully adjustables
buddy club N1 exhaust
Sir rear break disc conversion
front and rear struts
apexi short ram induction kit
recaros from a integra type r

and when i have enough money drop in a B16

and will then hopefully give my dad a run for his money!!!

as he has a renault megane sport 240bhp and an evo 8 at 320bhp




let me know what u think bare in mind this is my first car! and there still alot to be done! thanks

forgot to add that im also doin my rocker cover





Does anyone have any idea on what else i could possibly do?

let me know thanks guys...

Last edited by will-i-a-m on Wed Feb 25, 2009 12:49 pm, edited 3 times in total.

- Tue Feb 24, 2009 3:20 pm #98616 Buy my rear disc conversion

Nice so far though ;)

- Tue Feb 24, 2009 3:27 pm #98617

Buy my rear disc conversion

Nice so far though ;)

iv already got some jsut havnt had time to fit them yet! but thanks for offerin anyways..

- Tue Feb 24, 2009 3:38 pm #98619 Well that sucks

I've got so much crap in my garage I need to get rid of, anti roll bars, lower arms, disc conversion with brand new discs / pads and cables and my Koni SSK as well as a camber kit which has got to come off my car lol

Silly number of parts

- Tue Feb 24, 2009 4:05 pm #98622 Any more pics of the Evo?

- Tue Feb 24, 2009 5:20 pm #98638 good job on paint!

I <3 my Honda.
>Two.Zero< Garrett 60-1
~587whp-384wtq~ pump/meth tuned by BTperformance
@cdmtyper

My Build Thread
http://civic-eg.com/viewtopic.php?t=718

- Tue Feb 24, 2009 5:53 pm #98655 looks tasty, that wheels are they?

"We only have one future, and it will be made of our dreams, if we have the courage to challenge convention." Soichiro Honda.

Jdm Eg6 SiR2
Ukdm Dc2 Type-R (braking)
Ap1 S2000
S800M (mk2)

- Tue Feb 24, 2009 7:03 pm #98662 havnt got any more pics of the evo as just took a quick snap whislt it was on the ramp gettin some new diff bearings!

and the alloys are from my friends del sol so i dont know if they are original or aftermarket?

- Tue Feb 24, 2009 7:03 pm #98663

Well that sucks

I've got so much crap in my garage I need to get rid of, anti roll bars, lower arms, disc conversion with brand new discs / pads and cables and my Koni SSK as well as a camber kit which has got to come off my car lol

Silly number of parts

have u got any strut braces?

- Tue Feb 24, 2009 7:28 pm #98670 I do, only a rear one though, whiteline.

You gotta cut the rear trim to fit it though



You got provisions for ARBs? I can provide you with a whiteline 20mm adjustable in April if you want as well Come with mounting hardware, lower tie bar etc Makes a huge difference to handling. Unfortunately the only spare rear arms I've got have half a bolt stuck in them. Not that it matters as the bushes are fried as well

- Tue Feb 24, 2009 7:39 pm #98673

I do, only a rear one though, whiteline.

You gotta cut the rear trim to fit it though



You got provisions for ARBs? I can provide you with a whiteline 20mm adjustable in April if you want as well Come with mounting hardware, lower tie bar etc Makes a huge difference to handling. Unfortunately the only spare rear arms I've got have half a bolt stuck in them. Not that it matters as the bushes are fried as well

No i havnt got provisions for the ARB's i will need to get some lower control arms from either an Sir or an integra dc2 for me to have them! how much will i be lookin at for the rear strut? and are u breaking ur car? or just gettin rid of unused parts?

- Tue Feb 24, 2009 7:50 pm #98675 I'm selling it on in Summer and I'm taking as many aftermarket parts off it as I can to make it appeal to more people. Probably still have difficulty shifting it but we'll see what happens.

I'll drop you a PM in a sec with a price and stuff ;)

- Tue Feb 24, 2009 7:53 pm #98678

I'm selling it on in Summer and I'm taking as many aftermarket parts off it as I can to make it appeal to more people. Probably still have difficulty shifting it but we'll see what happens.

I'll drop you a PM in a sec with a price and stuff ;)

ok m8! why are u selling it ? is it an Sir? what other parts are u trying to shift?

- Tue Feb 24, 2009 7:58 pm #98679 Nah it's a DX I've just acquired lots of parts from VTi's and stuff in my attempts to make it better. Can't be bothered anymore so I'm selling up and buying something rear wheel drive, and maybe with a turbo hehe

Here's a provisional list, may have more to get rid of. Most if it won't come off til April when I'm back home for Easter though.

20mm Whiteline rear anti roll bar + heavy duty mounts and lower tie bar
Standard VTi front anti roll bar (22mm) + poly bushes (the chassis bushes are 21mm but they still fit)
Another VTi front anti roll bar with standard bushes and fittings
Standard VTi rear anti roll bar (18mm iirc) with all bushes and fittings
VTi rear trailing arms with brand new EBC discs and black predator pads
VTi handbrake cables
Goodridge braided hoses
VTi front LCAs
Front camber arms - these look like skunk2 items but I don't think they are I got them off the guy I bought the rest of my VTi suspension bits from
B16 passenger driveshaft + halfshaft
Koni sport suspension kit
Whiteline rear strut brace

I think that's everything

- Tue Feb 24, 2009 8:01 pm #98681

Nah it's a DX I've just acquired lots of parts from VTi's and stuff in my attempts to make it better. Can't be bothered anymore so I'm selling up and buying something rear wheel drive, and maybe with a turbo hehe

Here's a provisional list, may have more to get rid of. Most if it won't come off til April when I'm back home for Easter though.

20mm Whiteline rear anti roll bar + heavy duty mounts and lower tie bar
Standard VTi front anti roll bar (22mm) + poly bushes (the chassis bushes are 21mm but they still fit)
Another VTi front anti roll bar with standard bushes and fittings
Standard VTi rear anti roll bar (18mm iirc) with all bushes and fittings
VTi rear trailing arms with brand new EBC discs and black predator pads
VTi handbrake cables
Goodridge braided hoses
VTi front LCAs
Front camber arms - these look like skunk2 items but I don't think they are I got them off the guy I bought the rest of my VTi suspension bits from
B16 passenger driveshaft + halfshaft
Koni sport suspension kit
Whiteline rear strut brace

I think that's everything

yeah i wont be home till easter as well as im in boardin skl in kent! but hopefully i will have enough money to try and get as many parts as i can! will benefit me alot! im sure it will u aswell!