I think that....

Anything & Everything Off-Topic (Some material may be offensive)
 Reply
User avatar

By jadeydrag0117
- Sun Nov 06, 2011 4:10 pm #280425
teal_dx wrote:I've been thinking about taking my tint off because it's 10 years old and starting to turn a little purpleish.


Its very easy, i started mine the other day and it just pealed right off, but the correct way to do it is to get some source of steam to melt the glue and apply it all around the surface of the tint, then start at a corner and chip it off with a razor blade while applying steam then start pulling the rest off but still apply the steam, then you'll be ready for new tint and make sure the glue is gone underneath, if its not just use some kinda chemical :hehe: :hehe:
User avatar

By jadeydrag0117
- Sun Nov 06, 2011 4:11 pm #280426 i think people use fabric steamers, haha im pretty sure you can use a iron to lol i was gonna but i want a fabric steamer cause then you could clean up the car after :thumb:
User avatar

By Apexracing
- Tue Nov 08, 2011 3:07 am #280680 peal it off and grab goo gone and a rag. clean it with glass cleaner after and your all set.
 Reply
Return to Junk Yard