Civic-EG.com Forum 3.3.1

[Apexracing]

- Fri Feb 24, 2012 2:36 pm #296093 Alright guys this motors clean, but im bringing basic tools down so i can check it over. Any tips on what to look for just in case i forgot any thing.

- Fri Feb 24, 2012 5:20 pm #296102 stripped bolt holes!

tranny bolts and such. basically any bolt hole you see check the threads in it

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

[teal_dx]

- Fri Feb 24, 2012 9:26 pm #296110 I'd turn it by hand and do a compression test. It won't be as accurate as if the motor were warm but at least you'll know if there's a bent valve if the numbers are way off. Check for metal/coolant traces in the oil too.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

[Apexracing]

- Sat Feb 25, 2012 4:26 am #296137 Alright i finally got home an hour ago. pics will be in my build thread.