Civic-EG.com Forum 3.3.1

- Wed Feb 25, 2009 4:49 pm #98927 So about a week ago i was drivin my car can all of a sudden it started to shake alot as i slowed down.
i got out of my car didnt see any thing. So on my way home it kept shakin
and then all of a sudden my front passenger tire popped out of my car
i raised the car, and it had 3 broken wheel studs. and the 4th one was ruin
So i replaced them and everything was GOOD
until yesterday it started doin it again, and on the same tire
i bet if i were to drive the car for like 10 more mins the tire wheel pop out again???

SO MY question is this:
WHAT COULD BE CAUSING THIS PROBLEM????

I WAS GUESSING ITS MY COILOVERS CUZ ITS TOO DROPPED IT BOUNCES ALOT. OR CAN IT BE STEER NKUCKLE, COULD IT BE MY HUB

PLEASE HELP ME OUT

- Thu Feb 26, 2009 3:38 am #99062 when the wheel is on the car, does it move easily? maybe the wheel bearing is so bad its overheating the studs and leading them to break?

- Thu Feb 26, 2009 5:27 am #99077

when the wheel is on the car, does it move easily? maybe the wheel bearing is so bad its overheating the studs and leading them to break?

Yeah I was thinking something like that as well..
or maybe the wheel is jarring too much from a bad bearing that lugs come loose?
I had something like that happen to my eclipse.. was driving on the interstate and i heard something and felt something and I was like wth..
pulled over into a business.. sure enough lugs were loose.
I don't really know what else it could be though.. check your bearings.

teal_dx was in a good mood on 3-22-09, so I'm not banned
95 Civic dx
95 Eclipse gst

[teal_dx]

- Thu Feb 26, 2009 5:31 am #99078 make sure you are using the right style of lugnuts for your wheels too.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Thu Feb 26, 2009 5:02 pm #99140 well yesterday i had a mechanic check it out
and well he told me that the holes on the hub, that hold the studs got to big
and that made the wheel studs looose

IM GUESSIN THATS THE PROBLEM NOW BECAUSE I TOOK A LOOK AT IT AND I SAW THE DIFFERENCE.

WHAT DO YOU GUYS THINK

- Thu Feb 26, 2009 10:49 pm #99189 That is probably the problem.
If the holes are getting too big for the studs to fit securely then you will probably need a new hub.. or some sort of adapter/washers.. but I would suggest the new hub.

teal_dx was in a good mood on 3-22-09, so I'm not banned
95 Civic dx
95 Eclipse gst

- Fri Feb 27, 2009 4:48 pm #99343 yup i just got one from the junk yard and its okay.... so far lol!!!!!!

- Sat Feb 28, 2009 3:15 am #99428 Nice man.
Hope that puts an end to your problems!

teal_dx was in a good mood on 3-22-09, so I'm not banned
95 Civic dx
95 Eclipse gst