I just took my head to get port and polish and im wondering if there is a product out there to clean like the carbon and oil build up all around the parts that are laying around, like cams and bolts.
Posted: Sun Mar 28, 2010 9:39 pm
by eg84dr
any degreaser should work just clean them good and put oil on evrything you clean so it doesnt rust
Posted: Sun Mar 28, 2010 9:41 pm
by marklopez
yeah degreaser, spray on, hose off
Posted: Mon Mar 29, 2010 1:19 pm
by forcefedEG
mineral spirits work really really good they eat thru alot of the "bronze" that builds up
that stuff has worked better for me than most de-greasers
normally i get a 5gal bucket and fill it with that or that crc parts cleaner and let it soak, that works the best if your not gona pay a machine shop to hot tank it...