Page 1 of 1

G Series?

PostPosted: Tue Jul 06, 2010 11:27 pm
by OleFolk
5-CYLINDER, SOHC 20-VALVE 2451 cc 176 HP @ 6500 RPM
http://www.jdmenginedepot.com/jdm_engin ... 2.5TL_G25A

Great info page:
http://www.garage507.com/foro/viewtopic ... cf05884df9

Ive been looking for times and other specs on this and if people have swapped these.

PostPosted: Wed Jul 07, 2010 3:12 am
by TrailerTrash
never seen that done before... would be unique as hell :thumb:

PostPosted: Mon Jul 26, 2010 3:17 am
by OleFolk
Bumpin :shock:

PostPosted: Mon Jul 26, 2010 7:26 am
by Gordongk
A swap with a F23 Block and H22 Head is also called a G swap. So if somebody ever tells you they have a G swap, they probably just mean that. A swap with an actual G would be tight though.

PostPosted: Mon Jul 26, 2010 2:45 pm
by OleFolk
Well your right.
That setup is called a G swap
But has nothing to do with the G series

"Some people colloquially refer to an F-series block (found on Accords) with an H-Series head (found on Preludes) as a G-series engine. This combination of an Accord bottom end with a Prelude head has nothing in common with the actual G-series engine."