help with trany mount
Posted: Tue Feb 02, 2010 2:38 pmIm going b and I want 2 know dose the d trany mount fit on an 1996 acura integra trany aka dose my d trany mount work on a b trany ?
Page 1 of 1
Posted: Tue Feb 02, 2010 2:38 pmPosted: Tue Feb 02, 2010 3:04 pmnope
Posted: Tue Feb 02, 2010 4:22 pmthank u
Posted: Thu Feb 18, 2010 4:48 pmthe d and b trans mount are the same as long as its from a dc integra to a eg. if you look at mount kits on innovative or hasport the mounts are same for d or b just depends on if your a 3 or 2 bolt mount. with the exclusoin of an auto conversion
Posted: Thu Feb 18, 2010 4:53 pmget thestock dc mounts andget eanergy susppension mount inserts shit work mad good
Posted: Sat Feb 20, 2010 3:08 amLol. this had me wondering too until i actually got a mount kit. Tranny mounts on EG 92-95 civic and DC 94-01 integras are the same.
this is where it gets diff.. 94-95 civic EG EX/SI comes factory with 3 bolt driver side mount like the 94-01 integra. 92-93 Civic EG All comes with the 2 bolt driver side mount!!
the rear mount is also the same for 92-95 civic and 94-01 integra!!
Hope that help!
this is where it gets diff.. 94-95 civic EG EX/SI comes factory with 3 bolt driver side mount like the 94-01 integra. 92-93 Civic EG All comes with the 2 bolt driver side mount!!
the rear mount is also the same for 92-95 civic and 94-01 integra!!
Hope that help!
Posted: Mon Feb 22, 2010 5:34 pmdidnt as much care for the energy suspension inserts... but i have done the trick of busting the oil pockets out the mounts and filled them with window urethane... its bare bones but it works, 3M window weld can be bought at any parts store for about 20 bucks a tube and used in a calk gun... just fill the gaps in the mounts with the urethane and let them set up... the window weld is pretty solid when it sets up enough to rattle the dash at idle just a little bit