Page 1 of 1

d-series clutches

PostPosted: Fri Apr 09, 2010 10:46 pm
by 93hatcheg
will a clutch outta a d16z6 fit a d15b7? my bros clutch went out in his b7 and i have just bought a brandnew competition clutch stage 2 so i was gonna give him my old one. i also have the flywheel from my z6 that he coul have if needed.

PostPosted: Fri Apr 09, 2010 10:55 pm
by Classiccarsrule85
indeed as far as ive researched all d series flywheels are the same 88 on up and 92 on up clutches are the same....(hydro to hydro cable to cable....)

Re: d-series clutches

PostPosted: Fri Apr 09, 2010 11:46 pm
by teal_dx
93hatcheg wrote:will a clutch outta a d16z6 fit a d15b7?


yes :thumb: 92-00 are all identical.
There's something about the 88-91's that are different. The splines are different and I think maybe the overall diameter is too. And that might only be some models or years of the 88-91's

Re: d-series clutches

PostPosted: Mon Apr 12, 2010 12:39 pm
by forcefedEG
teal_dx wrote:There's something about the 88-91's that are different. The splines are different and I think maybe the overall diameter is too. And that might only be some models or years of the 88-91's


the 88 is the only one thats diff i belive as far as spline size, and the diameter is diff on those as well, but i have seen 2 diff sized 92to95 clutches as far as diameter :?