Civic EG

Posted: **Wed Jan 25, 2012 9:14 am**

Use it or not?

Or should i just scuff it down with some emery cloth...

-dont really have time to take it to get it resurfaced, but if absolutely necessary will do.

Posted: **Wed Jan 25, 2012 2:06 pm**

95CivEg wrote:

better safe than sorry... especially if it's going on an engine that is going to see more HP than stock.

Posted: **Mon Mar 05, 2012 1:49 am**

That's still in good shape, scuff it up a little with some sandpaper and then spray it off with brake clean.

Posted: **Mon Mar 05, 2012 3:49 am**

You can have them surfaced its better that you do that then scuff if yourself. The clutch needs a good surface to grab to and you will not get all the hot spots off of the flywheel with sand paper or emery paper cause its deep down in the metal.

So either replace it or have it re-surfaced.

Posted: **Mon Mar 05, 2012 3:54 am**

i would just replace it. i got a new one from advance auto parts for $60. :thumb:

Posted: **Mon Mar 05, 2012 4:24 am**

deff replaced or resurface. you can get it lightened too while its at the machine shop :thumb:

Posted: **Wed Mar 14, 2012 5:55 pm**

we have an o'reilly auto parts here that will resurface it same day for like 15 dollars i think. ask you local parts store if they can do it

Civic EG

Flywheel Question??

Flywheel Question??

Re: Flywheel Question??