Dash Seats, Steering Wheels etc... If it's inside your Civic then it's in here.
User avatar
By Zhang516
#129721 So im basically guttin the car to change interior color and after 4 hours all I have to do is remove the dashboard. Ive almost removed all the bolts and screws but the climate control screws are a pain to get out and the one nut on the passenger airbag :x .

Do I have to remove the climate control?? Anyone know how to remove the passenger airbag??

Thanks!
User avatar
By chrono404
#129789 Taking the dash off wasn't that diffucult, 2 bolts on both sides and i think 1 or 2 in the middle, once you pull it out on the diver side is the main clip to unplug all electrical harneses, you will have to unhook the the climate control temp wire. I belive there is a harness behind the temp cluster you also have to unhook.

Thats all I recall being behind my '93 Sedans dash. They dont have pass airbags so I dont know anything about how to unhook it.
Last edited by chrono404 on Sat Jul 11, 2009 6:49 am, edited 1 time in total.
User avatar
By DontHateonEG8
#129795 dont forget that bolt behind the upper center vent!
User avatar
By Zhang516
#129876 no i got the one behind the vent its just this dam airbag one that needs to be unscrewed.
User avatar
By teal_dx
#129877 my EG didn't have the pass airbag. But try removing the glove box completely. That's how I was able to get to the airbag bolts on my EK, with some long extensions.
User avatar
By Zhang516
#129878 yea i took off the glovebox and i got off 3 of the screws...but do u think it will be easier to just paint it with it in the car??