making the horn work w/ aftermarket wheel

Dash Seats, Steering Wheels etc... If it's inside your Civic then it's in here.
 Reply
User avatar

making the horn work w/ aftermarket wheel

By 93hatcheg
- Sun Dec 06, 2009 5:38 am #160221 i got a new steering wheel and wanna make the horn work...i kno i have to run the wire from the yellow plug under the dash but what do i do after that? the momo horn buttom only has one male wire connection on the back.

al help is appreciated! thanks
User avatar

By asianrob
- Sun Dec 06, 2009 5:43 am #160224 LOL.. i jsut did this today!!!!

with SRS
http://importnut.net/civicsteeringswap.htm
With out SRS ( i suggest this way because it is easier to do and you dont need to mess with the SRS even if you do have it.)
http://www.honda-tech.com/showthread.php?t=1926111
the honda tech one... just run a straight wire from the relay to a metal strip to make contact with the back of the contact plate. and etc..
User avatar

By 93hatcheg
- Sun Dec 06, 2009 5:18 pm #160252 dang ok cool thanks man ima get right on nthis :) thanks man
 Reply
Return to Interior