Civic-EG.com Forum 3.3.1

- Fri Sep 21, 2012 11:18 pm #316203 i want to take the trunk door molding plastic panel out but the lever seems to be the only thing holding it down right now

- Sat Sep 22, 2012 1:13 am #316209 easiest and safest way is to use two screwdrivers flat heads and pry up and out they are i wanna say pinched on in a way much like the trunk and fuel levers are held in place fairly easy to remove safely

1980 volvo 242
2001 crv
not using punctuation or good sentence structure since day 1

[teal_dx]

- Sat Sep 22, 2012 1:50 am #316211 First you have to pull off the knob on the end of the lever.

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Sat Sep 22, 2012 3:55 am #316220

First you have to pull off the knob on the end of the lever.

aww... thats what i thought, how can i do it without breaking anything (its my biggest fear)

[teal_dx]

- Sat Sep 22, 2012 3:56 pm #316241 I'm pretty sure you just have to wiggle and pull

Do Not PM me your technical questions. Post them in the forum!
My 1992 SOHC Turbo Hatch
My Youtube Channel: 6th Gear Garage

- Wed Jan 02, 2013 5:53 am #323124 Yeah man just slide that handle off and there should be a screw under it. Remove it and the whole plastic cup comes off then the rest of the plastic should just snap like a door panel.

D15 '95 EG6
eBay and junkyard parts ftw!
2009 Honda ruckus (with mods) for sale!!

- Wed Jan 02, 2013 7:40 am #323131 On mine I have to pop the knob off, remove the screw, then while pushing the metal lever to the drivers side I can wiggle it off.