Page 1 of 1

ignition switch removal

PostPosted: Sun Aug 23, 2009 4:25 pm
by Megaman
does anybody know how to remove the part were i put my key to start the car cuz somebody tried to steal my car last night and made a big mess of it so now i have to replace it any ideas would be really helpful thanks guys

PS. i think i post this in the wrong spot

PostPosted: Mon Aug 24, 2009 1:35 am
by VegasCivic
Been there, done that. :(
http://civic-eg.com/viewtopic.php?t=4080

Hope it helps :thumb:

PostPosted: Mon Aug 31, 2009 7:34 pm
by Joplies
I dont mean to be a dick bro but you really didnt need to remove your steering column or go through all of that work. All that needs to be done is remove the outer shell that goes around the steering columb inbetween the dash and the steering wheel. turn the key to ACC is press the little silver button and pull (MAKE SURE TO REMOVE BATTERY LIKE VEGASCIVIC SAID THOUGH)


Unless you have some odd civic from Darfur or somthin :wink:

PostPosted: Mon Aug 31, 2009 9:32 pm
by VegasCivic
I removed mine because it was destroyed.

Darfur wtffff :lol:

PostPosted: Tue Sep 01, 2009 2:34 am
by Joplies
VegasCivic wrote:I removed mine because it was destroyed.

Darfur wtffff :lol:



haha shits effed up over there so i figuared if there was a civic over there it probly is too haha :lol:


but yeah sorry i guess i didnt really read that far into it. My bad bro. and im glad you didnt take it as i was being a dick lol :thumb:

PostPosted: Tue Sep 01, 2009 3:10 am
by eg_turbo_hatch
Joplies wrote:I dont mean to be a dick bro but you really didnt need to remove your steering column or go through all of that work. All that needs to be done is remove the outer shell that goes around the steering columb inbetween the dash and the steering wheel. turn the key to ACC is press the little silver button and pull (MAKE SURE TO REMOVE BATTERY LIKE VEGASCIVIC SAID THOUGH)


Unless you have some odd civic from Darfur or somthin :wink:


how do you do it ive been told that only works on ef not eg or ek and i cant get it to work

PostPosted: Tue Sep 01, 2009 4:57 pm
by Joplies
Honestly i could exactly ttell you right now, i have to be looking at my eg and...well im at work lol....But its do able. Coplies and i have done it on and EK and an EG so i know its do-able. i will attempt to explain it better after work and i look at it.

PostPosted: Thu Sep 10, 2009 5:28 am
by eg_turbo_hatch
Joplies wrote:Honestly i could exactly ttell you right now, i have to be looking at my eg and...well im at work lol....But its do able. Coplies and i have done it on and EK and an EG so i know its do-able. i will attempt to explain it better after work and i look at it.


just checking to see if you know a way yet before i buy a whole new ignition