Page 1 of 1

how many bolts to take out...

PostPosted: Thu Sep 30, 2010 2:45 am
by EJ1STYLEN
how many bolts are there to take out the black bezel on the gauge cluster the main facing?....

PostPosted: Thu Sep 30, 2010 3:36 am
by chrono404
3

2 on the top of the instrument cluster. and 1 under the hazard switch.

PostPosted: Thu Sep 30, 2010 4:14 am
by EJ1STYLEN
ok i thought it was like 4..cause i took all 3 out and tried to pull it off and it wouldnt come off...hehe i thought there was one more behind were you can put the clock at...

PostPosted: Thu Sep 30, 2010 4:19 am
by chrono404
its in there tight, just 3 screws tho. just pull it out evenly and it will come out unbroken.

PostPosted: Thu Sep 30, 2010 7:39 am
by BlueVic_8354
if you can remove the coin pocket/moonroof/foglight block off, you can pry-out the driver side air vent... then the whole thing would come-off...

PostPosted: Fri Oct 01, 2010 3:16 am
by EJ1STYLEN
ok..cause i tried pulling it threw the middle where the hazard button go...ill try to do it probably this sunday when i have alot of time...is there any trick?

PostPosted: Fri Oct 01, 2010 10:44 am
by 95c1v1c
Not sure if you understand yet...1 nut to take off for our steering wheel. There are 2 airbag screws and you need a T25 torx bit for those. The hub mounts on the main splines and will give you a bolt configuration once it is installed...should say on the item description.

PostPosted: Fri Oct 01, 2010 10:58 am
by Method
^^ wrong thread. he's asking to take his dash bezel off. not his steering wheel.