TRUNK anybody know how to take this out?
Posted: Fri Sep 21, 2012 11:18 pmi want to take the trunk door molding plastic panel out but the lever seems to be the only thing holding it down right now
Civic EG
Forum for the Honda Civic EG 1992-1995
http://www.civic-eg.com/forum/
TRUNK anybody know how to take this out?
Page 1 of 1
Posted: Fri Sep 21, 2012 11:18 pmPosted: Sat Sep 22, 2012 1:13 ameasiest and safest way is to use two screwdrivers flat heads and pry up and out they are i wanna say pinched on in a way much like the trunk and fuel levers are held in place fairly easy to remove safely
Posted: Sat Sep 22, 2012 1:50 amFirst you have to pull off the knob on the end of the lever.
Posted: Sat Sep 22, 2012 3:55 amteal_dx wrote:First you have to pull off the knob on the end of the lever.
aww... thats what i thought, how can i do it without breaking anything (its my biggest fear)
Posted: Sat Sep 22, 2012 3:56 pmI'm pretty sure you just have to wiggle and pull 
Posted: Wed Jan 02, 2013 5:53 amYeah man just slide that handle off and there should be a screw under it. Remove it and the whole plastic cup comes off then the rest of the plastic should just snap like a door panel.
Posted: Wed Jan 02, 2013 7:40 amOn mine I have to pop the knob off, remove the screw, then while pushing the metal lever to the drivers side I can wiggle it off.