Page 1 of 1
accord typre r seats into my eg?
Posted:
Sat Jun 08, 2013 3:21 pmby alexwiththeeg3
So I've already gone out and bought a pair like a dummy and they wont fit, the standard rails of the old seats are completely different and wont fit either... Does any one know how I can get them in? I've read that dc2 rails will work? Any help is greatly appreciated
Posted:
Sun Jun 09, 2013 8:36 pmby alexwiththeeg3
Does anyone have any ideas? I'm currently left seats as the old ones are f***ed
Posted:
Sun Jun 09, 2013 11:29 pmby nicksdelslow
Pics would help
Posted:
Mon Jun 10, 2013 7:39 amby mADmAN
dc2 rails bolts right up to the EG chassis
EK rails bolts right up to the EG chassis except for 1 hole.
dont know how those 2 rails will bolt to the prelude seats though.
Posted:
Mon Jun 10, 2013 11:20 amby alexwiththeeg3
i've read around that the dc2 rails will bolt up but im not sure if the seats will sit on them properly, as the mounts are approx 290mm centre to centre.. whereas on the accord seats i measured it at about 230mm centre to centre. Will try and get some pictures of them
Posted:
Mon Jun 10, 2013 11:23 amby alexwiththeeg3
how do i even upload pictures? lol
Posted:
Mon Jun 10, 2013 12:12 pmby alexwiththeeg3
so im looking at buying some of the buddy club super low seat rails, and then just drilling the brackets attached to the seats and it should just bolt right up then? or have i over looked something..
Posted:
Mon Jun 10, 2013 3:37 pmby alexwiththeeg3
or would it be easier to just get hold of some red dc2 recaros? they bolt straight in...