- Fri Sep 12, 2008 2:03 am
#69348
OK, many of u know me and many don't, i own a small honda/acura shop in the Rockford,IL area, and i had recently finished an all motor civic and it came out GREAT !!
So now i decided to do the SAME to my other civic hatch !
This one will be my Daily Driver !!
I'm just gattering parts as of now, but will post pictures once i start in a week or so.
Also i have been gathering opinions but decided to go my way
So far what i have,
Mint 95 civic vx 87,5## miles on body, No rust !
I took out the vx engine, and re painted car as the clear coat was peeling !
So here's my current part's i have, and NONE of them are installed as of now, once i start installing i will post pictures, thanks
ENGINE:
D16A6 block, Honed, Micropolish crank,0.20 overbore,ACL bearings,forged rod's,High Comp pistons{COATED},chrome SS rings.
D16Z6 head, Port flow,P&P,Skunk 2 High Comp valves, Bisimoto springs,milled, 00KR.1 SHAVED head, 2 layer D16Y8 metal head gasket,race bearings,Comp Cam, ALL NEW gaskets,seal,o-rings ETC. New water pump,valve seals.
d16Z6 Intake Manifold, Port-n-Polished+Throttle body. PREETY MUCH ALL NEW !!
7.5 LB fidanza flywheel, stage 2 xtd clutch.
greedy timing belt,custom short ram intake,2.5" radiator+silicone race hoses,Jdm fluid covers,Motor mount bushings, Shifter bushings, SPOON engine torque damper,SR chipped ecu { WILL DYNO TUNE} ,NKG plugs+wires,grounding kit, Full 2.5" exhaust, High-Flow converter,
[That's about it for the Engine bay/performance.
If u think i should add something let me know before i start LoL,
Suspension/BrakingHandling.
Front,Rear upper and lower strut { SKUNK }
New Ball joints,arms bushings.
AEM brake pads,Integra brake reservoir,Slotted/drilled rotors.
Interior:
Del-Sol seats, Red stripe,Broadway mirror,Spoon Sports floor mats,JDM coin pocket,Rear trunk light,Cargo cover, pillar gauges+pillar [ APEXI}
CBF si cluster,JDM red stich, shift boot+knob,Dash led light conv:,dash vtec light,momo pedals.
[u]Exterior:[/u]
Fresh milano Paint, MIRROR detail buff,Black CBF duckbill spoiler,Vision rear tow hook,Hid projectors W/ custom HID,Antenna block of plate,Rear wind defuser { stock VX option} Red box lugs,Vx polished wheels, new tires,Jdm taillights { NO REFLECTOR} ,Stanley fog lights CBF cover, light yellow color,JDM red H badges,CBF Spoon mirrors,Type-R lip,CBF wipers,
that's about all i can think of at the moment that i have sitting in my shop ready to go in, i just have to find some time once I'm done with fixing other peoples cars LoL,
Please let me know what u think, thanks
So now i decided to do the SAME to my other civic hatch !
This one will be my Daily Driver !!
I'm just gattering parts as of now, but will post pictures once i start in a week or so.
Also i have been gathering opinions but decided to go my way
So far what i have,
Mint 95 civic vx 87,5## miles on body, No rust !
I took out the vx engine, and re painted car as the clear coat was peeling !
So here's my current part's i have, and NONE of them are installed as of now, once i start installing i will post pictures, thanks
ENGINE:
D16A6 block, Honed, Micropolish crank,0.20 overbore,ACL bearings,forged rod's,High Comp pistons{COATED},chrome SS rings.
D16Z6 head, Port flow,P&P,Skunk 2 High Comp valves, Bisimoto springs,milled, 00KR.1 SHAVED head, 2 layer D16Y8 metal head gasket,race bearings,Comp Cam, ALL NEW gaskets,seal,o-rings ETC. New water pump,valve seals.
d16Z6 Intake Manifold, Port-n-Polished+Throttle body. PREETY MUCH ALL NEW !!
7.5 LB fidanza flywheel, stage 2 xtd clutch.
greedy timing belt,custom short ram intake,2.5" radiator+silicone race hoses,Jdm fluid covers,Motor mount bushings, Shifter bushings, SPOON engine torque damper,SR chipped ecu { WILL DYNO TUNE} ,NKG plugs+wires,grounding kit, Full 2.5" exhaust, High-Flow converter,
[That's about it for the Engine bay/performance.
If u think i should add something let me know before i start LoL,
Suspension/BrakingHandling.
Front,Rear upper and lower strut { SKUNK }
New Ball joints,arms bushings.
AEM brake pads,Integra brake reservoir,Slotted/drilled rotors.
Interior:
Del-Sol seats, Red stripe,Broadway mirror,Spoon Sports floor mats,JDM coin pocket,Rear trunk light,Cargo cover, pillar gauges+pillar [ APEXI}
CBF si cluster,JDM red stich, shift boot+knob,Dash led light conv:,dash vtec light,momo pedals.
[u]Exterior:[/u]
Fresh milano Paint, MIRROR detail buff,Black CBF duckbill spoiler,Vision rear tow hook,Hid projectors W/ custom HID,Antenna block of plate,Rear wind defuser { stock VX option} Red box lugs,Vx polished wheels, new tires,Jdm taillights { NO REFLECTOR} ,Stanley fog lights CBF cover, light yellow color,JDM red H badges,CBF Spoon mirrors,Type-R lip,CBF wipers,
that's about all i can think of at the moment that i have sitting in my shop ready to go in, i just have to find some time once I'm done with fixing other peoples cars LoL,
Please let me know what u think, thanks
