Post YOUR Hatchback here
User avatar
By Mordiiax
#138849 And now the ECU has been tuned.
Launch control @ 4500rpm.
Vtec @ 5300rpm.
Shiftlight @ 8000rpm.
Rev limit @ 8400rpm.

It pulls alot better all over the revband and it was well worth the money spent :)
By rojo92hatch
#138913 and how much did that tuning cost u?
User avatar
By Mordiiax
#139030 ~245€ or 349$
User avatar
By Mordiiax
#141694 Blox endlinks is pure crap:
Image
Occured during inspired driving on the street home from work...

AND THERE IS A TRACK DAY TOMORROW! :x
User avatar
By EgCruiser
#142079 hur mår ni? hehe .- så dårlig Tre kronor spilte dårlig mot Finland i stad
:o

men bilen din er ennå snygg :) jeg har lagt ut noen nye bilder av min eg , lenge sia jeg har vært her på forumet

men skal to noen snygge bilder til vekkan :-P my swedish not very good hehe
User avatar
By Mordiiax
#149019 Nope, the LCA is just fine. But the endlink cracked.

egCruiser: I´m gona take a look at it :)

Did some auto-x (is that what it´s called?) this weekend and some result is viewable here: http://www.youtube.com/watch?v=JshbTAh_p7c @ 4:45.

Now the car has been put to sleep in my garage for the winter :)
User avatar
By Mordiiax
#151712 Bought this piece of porn today ;)
Image
B18C6 - 212hp & 200nm.
User avatar
By EgCruiser
#151720
Mordiiax wrote:Bought this piece of porn today ;)
Image
B18C6 - 212hp & 200nm.


how much "kroner" did it cost ?
what have happend to the engine in the car?
User avatar
By Mordiiax
#151901 15000 svenska kronor.
Nothing is really done with the engine as far as i know. It even has a b16a2 intake manifold so it is some impressive figures it puts out.
User avatar
By xNETZx
#151920 that is a sweet engine
User avatar
By Greasedmonkey
#152007 Blox equals FAIL!!!!
User avatar
By Mordiiax
#184091 Got summer feelings today so i went to the Civic´s resting place for the first time this winter and started working on it :)
I will probably not swap the engine just yet, but i (finally!!) got my pwd:jdm tralingarm bushings and began replacing those.

The new bushings
Image

The remains of the old bushing. With some taps of the sledge and man power i got it out. Really bad condition :P
Image

...and here is where the grease work ended today. Ran out of time :/
Image
User avatar
By Mordiiax
#186802 Beautiful :)
Image