Civic-EG.com Forum 3.3.1

- Thu Jun 28, 2012 1:06 am #309616 Well the Car is dead right now...
Got some new parts OHHH yeah!

Wisco Pistons Part Number K545M84
Manly Rods 14025-4

Gonna be pretty sick.
I been told I should reuse my Rod Bearings... Can anyone confirm or deny this? Or should I go with ACL bearings?
I have ACL Bearing on order in standard size. So I should be okay.

Also Now I need to order another HeadGaslet Not even 50miles on the one I have but I DO NOT WANNA RISK IT!

Also Complet updated parts list on page one

- Fri Jun 29, 2012 3:23 pm #309733 Just got my NEW GSR Head

here is the specs

HEAD INFO:

99 GSR VTEC HEAD

PORT & POLISH JOB

3 ANGLE VALVE JOB

HOT TANK JET WASH CLEAN

RESURFACE HEAD




Done by RS Machine In FL.


HEAD PARTS:

NEW SUPERTEC RACE VALVES

NEW SUPERTEC DUAL SPRINGS

NEW SUPERTEC TITANIUM RETAINERS

NEW SUPERTEC VALVE LOCK KEEPERS

NEW VALVE SEALS

- Fri Jun 29, 2012 7:57 pm #309748 Badass!

- Fri Jun 29, 2012 10:34 pm #309759 With that head, My Wisco/Manly set up. I should be able to put down some power

Just waiting on everything to come in. Still looking for a set of 1000cc injectors for a good price everyone wants gold bricks for them!

But all this should make for a pretty mean civic

Then Its gonna be time to save for a AWD Set up, or a LSD
and maybe a second car.

- Sun Jul 01, 2012 12:16 am #309823 Hahaha I'd probably start with a second car. I'm thinking about getting a 240sx

- Sun Jul 01, 2012 11:39 pm #309887

Hahaha I'd probably start with a second car. I'm thinking about getting a 240sx

Yeah I deff need a second beast, I hate bumming rides everywhere, and thats all I have been doin this week.

But I got the B20B out of the car last night.
No Engine Lift, 3 dedicated people. and brute force got it out

I was gonna reuse the block, but looked into it more, and seen some cylinder damage, not sure If I can hone it out or not, but dont wanna risk it.
The rest of the parts should be here this week soon, and then I can start putting everythng back together.

Also noticed a fine line one Cylinder 1 & 4 goin down, not sure if its a begining of a crack or not but dont wanna risk it. So Gonna Build the B20Z and throw it in to the car...

- Mon Jul 02, 2012 5:38 pm #309953 haha smart man, better safe then sorry, i know your pain, i been trying to drag my motor around on a layed down hand truck with a crate on top...almost tipped it over once lol, so my father and law went and got me a cherry picker ^_^

94 EX coupe (sold 1/2016)
http://civic-eg.com/viewtopic.php?t=27951

93 DX coupe build 2.0 (R.I.P.)
http://civic-eg.com/viewtopic.php?p=331386#331386

- Tue Jul 03, 2012 3:26 pm #310039 Got my New Headgasket and Timing Belt

Still Waiting for my Pistons,Rods, Bearings, Block Gaurd, Clutch Aligment tool and most important My built head to come in, Hopefully aiming to have the car up and running by the weekend. and then scedual a new dyno day for sometime shortly after that.

Kinda worryied about building my own bottom end, first time I will be dissasemblying and putting everything to getherby my self.

So I plan on doin everything one Piston at a time. honeing and then putting the new one in.... gonna take my time. TQ eerything right and hopefully not fuck anything up

- Tue Jul 03, 2012 10:21 pm #310071 New manley rods and reuse the rod bearings? Negative always go with new and ALWAYS triple check the clearances!!!

Team XXX Racing/WGHonda
My Build Thread EG#1 --> http://civic-eg.com/viewtopic.php?p=115 ... ht=#115778
EG#2--> http://civic-eg.com/viewtopic.php?t=23264
H2D--> http://civic-eg.com/viewtopic.php?t=192 ... ght=#19294

- Thu Jul 05, 2012 11:30 am #310171

New manley rods and reuse the rod bearings? Negative always go with new and ALWAYS triple check the clearances!!!

Got Standard ACL bearings.

- Fri Jul 06, 2012 3:33 pm #310232 Got My B20Z2 All torn apart, Cleaned. and ready for the Pistons to go into night with the new rods and everything.



Still got to tear the other B20B apart to get my brand new partts off that to reuse.

Hopeing to have everything Assembled tonight. then have the motor intomorrow afternoon. and get it pused out of my buddies garage and clean everything... I have to set a new Dyno time for the car which sucks, I wont drive it till it gets on the dyno. :/ So its gonna be sitting for a little bit longer which sucks. but I am okay with it.


Let me know what you guys think, and if I should do anuthing before the dyno.

- Mon Jul 09, 2012 1:30 am #310365 Well Guys, After a long weekend of working since 4 for my job, then being up till 2 wrenching on the car. it is alive again!

I was scared as fuck to turn the car over!
Hand Cranked it like 50 times to make sure everything was good. assembled everything in my good buddies garage. him and my friend did a great deal of work cuz I was a sleep friday night due to having to work saturday!

Well new parts on the car are as fallows:
B20Z2(146HP and 133tq stock)
99 GSR Head Fully Built By RS Machine using Full Supertech Dual Springs , Titatnium retainers, Race Valves, Guides Port and Polish and a 3 Angel Valve job.
Crankl Case Breather Set Up. Opened up the back of block.
Wisco 8.8-1 Pistons.
Manly H-Beam Rods
ACL Bearings
Gates Racing Blue Timing Belt
and a New Driver side axel

So after everything was hooked up I fired her up, ran good. for a while then shut off.... :/ Jumped her ran ok, died again.... turns out I forgot to install the Alternator belt some how :/ installed it. ran it and she runs like a beast!

Shes running a bit lean. 15.5 afr on 2k rpms.
and idle is somwhere around 16.4

No WOT yet, that will happen after tune and break in

The Edelbrock Intake mani is a bitch to get everything to hook up right on it!

Dyno is set for the 14th and hopefully she is a beauty on it!

Forgot to add. I now have a CEL Code. 5,6, and 7

- Mon Jul 09, 2012 2:05 am #310366 I saw that video on your facebook and it sounds good man!

- Mon Jul 09, 2012 3:14 am #310369 sweet i cant wait to see some numbers put down nice work

95 Civic Coupe DX - d15b7 - some mods nothing crazy - My 5th EG
98 Jeep Cherokee 2 door - little lift with 31s 4.0 5 speed
77 Chevrolet C10 - Mild 350/350 combo - lowered a little

- Mon Jul 09, 2012 3:25 am #310370 I Cant wait either man! Hopeing to get some decent numbers.
Lots of Time/Money/Blood has gone into this car. I think after the 14th. Hatch-O-Doom will be put on hold. to pay off the debt it has put me into.
and find a new DD.
The DD Will either be a 2000-2002 car.
looking at
WRX/S2000/325xi/ something of that nature. Kinda leaning towards a Bimmer Wanna look kinda rich for the ladies. and something I can keep stock and not spend crap loads of money into.

But here are some pics of the Build of the week. Maybe I should try again for another ROTM- cuz I tried 2, lost 2
Sorry for bad quality, taken with the Celly, late at night.

Everything Installed. Ready for its first fire up








Garage before we cleaned the horrendous mess that we made with the motor swap


What everyone will see come the 14th


and the Vid. Sorry bad quality... Will get a better one sooner or later