Civic-EG.com Forum 3.3.1

- Wed Jul 24, 2013 12:50 am #334624 just picked this up from upullandpay's pull-a-thon.



complete rear disc setup w/ sway bar from a 94 integra sedan. does anyone know if i will have problems with the ebrake cables being from a sedan and putting in a hatch?

- Wed Jul 24, 2013 3:22 am #334633 You shouldnt have a problem due to the fact that the integra sedans and coupes are only 6 inches in length different. I am planning on doing the exact same thing to mine but just the rear disk swap, not the whole suspension transfer. Cars coming together though. Keep it up. =)

Check out my thread.

93' Black & Green Build
http://civic-eg.com/viewtopic.php?t=26247

- Wed Jul 24, 2013 3:36 am #334636 i wont be using the struts, the bolts are siezed inside the bushings so i just took all of it in one piece. going to replace all of the bushings before installing as well as new rotors pads and repainting them. i got the whole setup as well as 2 accord ecus, a good door hinge, good motor mount, a steering whell and marker lighs for my buddies crx all for $40

- Wed Jul 24, 2013 4:11 am #334639 haha I know exactly what you mean. I picked up all 4 corner KYB Coilovers with Spoon Springs, also a Catback Apexi N1 Exhaust off a 95 Teggy for $125=)

I love Pick-N-Pull.

93' Black & Green Build
http://civic-eg.com/viewtopic.php?t=26247

- Tue Jul 30, 2013 5:02 pm #334921

just picked this up from upullandpay's pull-a-thon.



complete rear disc setup w/ sway bar from a 94 integra sedan. does anyone know if i will have problems with the ebrake cables being from a sedan and putting in a hatch?

great start...i did the same on my HB

1993 Civic CX
Build Thread
http://civic-eg.com/viewtopic.php?t=20137