- Sat Apr 12, 2008 10:52 am
#50205
This is my 1995 Honda Civic ESI, EG5. Bought it for £1200.
Car is pretty much standard and rust free still with original Honda shell and no new replacement panels.
Some subtle modifications as follows:
Engine:
Standard d16z6 VTEC and Gearbox
AEM V2 RAM Air Intake System
Iridium Spark Plugs
NGK Performance Ignition Leads
Interior:
Black UK Interior
Standard Honda Steering Wheel (With air bag, urgh!)
Standard ESI Seats
JDM RHD Dual DIN Centre Console 190209900174
Standard Gear Knob
Exterior:
JDM Amber Corners
Phillips Ultra Snow White Headlight Bulbs
Colour Coded Door Mirrors and Door Handles
Exhaust:
Spoon Sports N1 Exhaust System
Suspension:
Eibach Lowering Springs (40mm Drop)
Wheels and Tyres:
Standard Steel Wheels (As Slipstreams got badly damaged)
Mods comming/ or not shown in pics:
Stripped Rear Interior (Seat etc)
Momo Corse Steering Wheel
Recaro Red ITR Seats
Skunk2 LCA's
AEM Fuel Rail
CF bonnet and boot lid (JDM square plate housing)
CF Spoon Duck Bill
Spoon door mirrors
Window Tint, maybe?
Turbo'd ... eventually.
Here's some shots of when I got it...
I've started to mod the car how I want it, here are the start of pictures of what I'm doing to it, some photos of when I received the car...
Rollin' on steel wheels due to damaged SlipStreams. So far the cars been dropped on Eibach lowering springs, only by 40mm. The car wont be going any lower as roads around me are crap.
I love my Mugen socks
everyone has Spoon's so thought I would be different and go with the orange, kinda goes with the red. Engine fitted with Iridium spark plugs, NGK performance ignition leads and also fitted with a AEM V2 Intake System...
I also have one of these, but no bolts to fit it. Any ideas on size?
So far, I've not done alot of work to the car. I've got rid of the UK/EU front number plate bracket, gone with the 'import' look...
My JDM Honda Teddy
Oh and fitted with the Spoon N1
much louder than what I expected! Sounds a treat when the VTEC kicks in...
Soon to come next week...
CF... Lots of CF...
I plan to eventually boost this... but first need some eagle rods and decent pistons. Still debaiting wether to take the rear seats out or not.
Car is pretty much standard and rust free still with original Honda shell and no new replacement panels.
Some subtle modifications as follows:
Engine:
Standard d16z6 VTEC and Gearbox
AEM V2 RAM Air Intake System
Iridium Spark Plugs
NGK Performance Ignition Leads
Interior:
Black UK Interior
Standard Honda Steering Wheel (With air bag, urgh!)
Standard ESI Seats
JDM RHD Dual DIN Centre Console 190209900174
Standard Gear Knob
Exterior:
JDM Amber Corners
Phillips Ultra Snow White Headlight Bulbs
Colour Coded Door Mirrors and Door Handles
Exhaust:
Spoon Sports N1 Exhaust System
Suspension:
Eibach Lowering Springs (40mm Drop)
Wheels and Tyres:
Standard Steel Wheels (As Slipstreams got badly damaged)
Mods comming/ or not shown in pics:
Stripped Rear Interior (Seat etc)
Momo Corse Steering Wheel
Recaro Red ITR Seats
Skunk2 LCA's
AEM Fuel Rail
CF bonnet and boot lid (JDM square plate housing)
CF Spoon Duck Bill
Spoon door mirrors
Window Tint, maybe?
Turbo'd ... eventually.
Here's some shots of when I got it...
I've started to mod the car how I want it, here are the start of pictures of what I'm doing to it, some photos of when I received the car...
Rollin' on steel wheels due to damaged SlipStreams. So far the cars been dropped on Eibach lowering springs, only by 40mm. The car wont be going any lower as roads around me are crap.
I love my Mugen socks
everyone has Spoon's so thought I would be different and go with the orange, kinda goes with the red. Engine fitted with Iridium spark plugs, NGK performance ignition leads and also fitted with a AEM V2 Intake System...
I also have one of these, but no bolts to fit it. Any ideas on size?
So far, I've not done alot of work to the car. I've got rid of the UK/EU front number plate bracket, gone with the 'import' look...
My JDM Honda Teddy
Oh and fitted with the Spoon N1
much louder than what I expected! Sounds a treat when the VTEC kicks in...
Soon to come next week...
CF... Lots of CF...
I plan to eventually boost this...
but first need some eagle rods and decent pistons. Still debaiting wether to take the rear seats out or not.
Last edited by CivicTypeR on Thu Sep 18, 2008 7:13 pm, edited 19 times in total.
