- Mon Jun 04, 2007 7:30 pm
#9722
Hi there,
Passing by, because of bouli en stefan..
Well what can i say...
I had some eg's, all i've swapped to b16a2 and the last one was a eg6 but i swapped a k20a2 in it.. so it was a k-eg.
spec's:
*k20a2 (stock)
*hondata k-pro ecu
*aem fuel rail
*aem fuel presureregulator
*wide band lambda
* cai
*header r crew
*invidia g200
*enginebracket's hasport
*radiator ep3 ( civic type r 04 )
*tenzo r strutbar
* r crew stage 2 axle's
* r crew harnass
interior:
*delsol dash
*s2000 startbutton
*original type r shift nob
*original shifterplate type r
*2 sparco speed seat's with sparco belts
*raid snap off
*momo millenium steering
*spoon rear upper strutbar
*megan c-strutbar
exterior
*clear black headlights
*amber corners
* cf front bumper lip
* cf hood
* rearbumper type r lookalike lip
chassis:
*front brake calipers and disc's of a honda legend
*goodridge steel brake hose's
*bildstein dampers with 4 cm lowering
*oz superturisimo's 16 inch
* power steering is exit. mounted an non ps
* abs is exit.
*mounted a brakeregulator from an crx with no abs with reardisc breaking
slide show build up:
http://www.streetlegalkhk.nl/gallery/sl ... e=k20civic
and now i'm driving a ed6
Passing by, because of bouli en stefan..
Well what can i say...
I had some eg's, all i've swapped to b16a2 and the last one was a eg6 but i swapped a k20a2 in it.. so it was a k-eg.
spec's:
*k20a2 (stock)
*hondata k-pro ecu
*aem fuel rail
*aem fuel presureregulator
*wide band lambda
* cai
*header r crew
*invidia g200
*enginebracket's hasport
*radiator ep3 ( civic type r 04 )
*tenzo r strutbar
* r crew stage 2 axle's
* r crew harnass
interior:
*delsol dash
*s2000 startbutton
*original type r shift nob
*original shifterplate type r
*2 sparco speed seat's with sparco belts
*raid snap off
*momo millenium steering
*spoon rear upper strutbar
*megan c-strutbar
exterior
*clear black headlights
*amber corners
* cf front bumper lip
* cf hood
* rearbumper type r lookalike lip
chassis:
*front brake calipers and disc's of a honda legend
*goodridge steel brake hose's
*bildstein dampers with 4 cm lowering
*oz superturisimo's 16 inch
* power steering is exit. mounted an non ps
* abs is exit.
*mounted a brakeregulator from an crx with no abs with reardisc breaking
slide show build up:
http://www.streetlegalkhk.nl/gallery/sl ... e=k20civic
and now i'm driving a ed6

![brushteeth [smilie=brushteeth.gif]](./images/smilies/brushteeth.gif)

Last edited by marcokeg20 on Mon Jun 04, 2007 7:50 pm, edited 2 times in total.
