i wanna go turbo

Turbo and Supercharger discussion
 Reply
User avatar

By seabass
- Wed Apr 22, 2009 9:31 pm #112562
teal_dx wrote:B16 or B18c1, not B20

k thanks i think iam gonna do b16 turbo
User avatar

By chrono404
- Wed Apr 22, 2009 9:33 pm #112563
teal_dx wrote:B16 or B18c1, not B20

x2

The B20 walls are 33% thinner due to a bigger bore. N/A applications are okay, Boosting will lead to cracked cylinder walls. I have a friend rebuilding his engine for this reason. If you want the displacement of the B20 you can put a LS crank/rods into a B18c1 block and get 2.0 liters of displacement. You will get the added torque of the extra .2 liters and still have the thicker cylinder walls.
User avatar

By seabass
- Wed Apr 22, 2009 11:11 pm #112603
chrono404 wrote:
teal_dx wrote:B16 or B18c1, not B20

x2

The B20 walls are 33% thinner due to a bigger bore. N/A applications are okay, Boosting will lead to cracked cylinder walls. I have a friend rebuilding his engine for this reason. If you want the displacement of the B20 you can put a LS crank/rods into a B18c1 block and get 2.0 liters of displacement. You will get the added torque of the extra .2 liters and still have the thicker cylinder walls.


i see thanks for the advice
User avatar

By berg89
- Tue Sep 29, 2009 3:07 am #147987 the C1 would be a beast! :D

By dawg316
- Tue Sep 29, 2009 5:57 pm #148091 b18b cheaper. handles boost well. pair it with a gsr. and have fun

stock internals are pretty good too
User avatar

By 94egmike
- Tue Oct 06, 2009 6:28 pm #149153 If you go fully built? B20 sleeved with vtec head..that be killer..
User avatar

By That One Dude
- Tue Oct 06, 2009 9:20 pm #149166 ^^^ That's what I was thinking. He said fully built. So any one of those you can build to be as good as all the rest.

Sleeving the block is the main priority if you want huge power. Forged rods and pistons and ARP hardware would help tremendously in the protection of your engine. You can rock the stock LS or B20 crank for longer stroke if you want to run with an 89mm stroke.

Whatever you do, tune. Spend as much money as is necessary to get a safe, reliable tune so you don't blow up your expensive engine and turbo.
User avatar

By lopez286
- Wed Oct 14, 2009 1:36 am #150589 b18c1, sleeved 84mm bore with ls rods, the best of all worlds :thumb:
 Reply
Return to Boost