Civic-EG.com Forum 3.3.1

- Fri Feb 05, 2010 5:03 am #173378 shortrly i will be getting a h22a its going in a hatch
jw is a h22a good for boost if so let me no a good set up i would like it to be reliable help me out plz

- Fri Feb 05, 2010 5:47 am #173390 any motor is reliable with boost with a good tune..
it all depends on your setup and whats your running.

- Fri Feb 05, 2010 6:25 am #173396 Sleeves are very weak. But i have seen stock motors make 400.

D16z6. Golden Eagle. AFI Turbo. Precision Turbo. Hondata. CG racing.
618hp, 407tq SOHC 10.68@137
My 92 hatch SOHC build. Quest for +600hp. Check it!

- Sun Feb 07, 2010 12:21 am #173794 h22s arnt the best motors to boost but there have been alot of high hp boosted h motors cuz the engine was built. if you want a stock internal turbo motor, shoulda kept the d-series.

sleave the h22, low comp pistons, h23 rods ( think there stronger, correct me if im wrong) or fordged con rods. then slap a turbo on it and get a GOOD TUNE.

- Thu Feb 18, 2010 4:39 pm #176204 most any engine runs ok on boost, depending on what year your h22 is depends on how itll like boost, supposedly the early h22's have steel liners in them like the b series engines theses are better for a boosted setup. the later 96 and newer engines have the FMR liners in them, there supposedly weak for boost and are not compatible with forged pistons, however the h22 dose benifit from a closed deck setup wich increases strength. my years maynot be exact but some popular tuning books have the same info in them...