Civic-EG.com Forum 3.3.1

- Sun Oct 14, 2012 3:47 pm #317916 i have the 95 honda civic special edition abs 4 wheel disc ext ext im boosting my gsr in it and im curious if i hook up my brake booster still cuzz immboosting or do i have a check valve that will help this issue?

- Sun Oct 14, 2012 5:17 pm #317919 what are you trying to figure out
if your brake booster will still work if you have a boosted motor

- Sun Oct 14, 2012 6:44 pm #317926 There should be a check valve in the middle of the vac line between the intake mani and booster. You can use the hose between the valve and the intake for a vaccum source for bov/wastegate/gauges/etc. you cannot use the hose from the valve to the booster, then you'd have no brakes.

600whp Turbo 84mm LS/Vtec Drag Hatch

- Mon Oct 15, 2012 1:21 pm #317961 yeah i feel dumb i found it last night after i put my engine in i had a blond moment haha and which port are you talking about that i can use for gauges and boost i have a vaccum block should i just plug that stuff to that

- Mon Oct 15, 2012 1:40 pm #317962 Run the vac block on that 3/8" hose between the check valve and the intake mani

600whp Turbo 84mm LS/Vtec Drag Hatch

- Mon Oct 15, 2012 1:42 pm #317963 so you want me tu run the brake check valce to the vaccum block and then what do i run to the manifold?

- Mon Oct 15, 2012 1:47 pm #317964 Run it in-line. Here's mine..

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Oct 16, 2012 12:28 am #317996 where are the other hoses running too?

- Tue Oct 16, 2012 1:06 am #317997 Wastegate, blow off valve and boost gauge

600whp Turbo 84mm LS/Vtec Drag Hatch

- Tue Oct 16, 2012 1:25 am #317998 the waste gate gets one?